Control of Steer-by-Wire Vehicles with Passivity Approach
نویسندگان
چکیده
Steer-by-wire system (SBW), in which the conventional mechanical linkages between the steering wheel and the front wheel are removed, is suited to active steering control, improving vehicle stability, dynamics and maneuverability. And SBW is applied to autonomous steering control to assist the driver. Conventional controller for SBW system is designed by general feedback control method. However, in this method, the driver cannot exactly feel the reaction torque generated from tire about road friction. And the stability of control system cannot guarantee in spite of highly variable human operators and environment dynamics. The goals of this paper are considered as follow: The one is a reproduction of environmental impedance in steering wheel. The other is the improved maneuverability for SBW system. Moreover, the stability of control system must be satisfied. This paper, first, reviews bilateral control scheme using disturbance observer proposed by us. Secondly, this paper proposes a novel bilateral control scheme with passive approach. We also examine the performance of the proposed control scheme and compare with bilateral control scheme using disturbance observer. The effectiveness of proposed method is demonstrated by experiment with electronic vehicle.
منابع مشابه
The Optimal Steering Control System using Imperialist Competitive Algorithm on Vehicles with Steer-by-Wire System
Steer-by-wire is the electrical steering systems on vehicles that are expected with the development of an optimal control system can improve the dynamic performance of the vehicle. This paper aims to optimize the control systems, namely Fuzzy Logic Control (FLC) and the Proportional, Integral and Derivative (PID) control on the vehicle steering system using Imperialist Competitive Algorithm (IC...
متن کاملSteer-by-Wire for Vehicle State Estimation and Control
In order to implement electronically variable dynamics for vehicle handling, the control system requires an accurate knowledge of the vehicle states as well as a means of actuation to precisely influence the vehicle’s motion. Steer-by-wire capability conveniently addresses both of these requirements. This paper first presents an approach to estimating vehicle sideslip angle using steering torqu...
متن کاملUnified Control of Brake- and Steer-by-Wire Systems Using Optimal Control Allocation Methods
A new optimal control strategy for dealing with braking actuator failures in a vehicle equipped with a brake-bywire and steer-bywire system is described. The main objective of the control algorithm during the failure mode is to redistribute the control tasks to the functioning actuators, so that the vehicle performance remains as close as possible to the desired performance in spite of a failur...
متن کاملDeliverable D23.2 Version 1.0 1 Steer-by-wire for Challenge 4.1, Electric Steering for 5.1 Highly Automated Vehicles for Intelligent Transport 7th Framework Programme the Future of Driving. Deliverable D23.2 Steer-by-wire for Challenge 4.1, Electric Steering for 5.1
متن کامل
Incorporating a Model of Vehicle Dynamics in a Diagnostic System for Steer-by-Wire Vehicles
This paper examines the benefits of incorporating vehicle dynamics modeling into the design of a diagnostic system for a steer-by-wire vehicle. The use of a model of vehicle dynamics improves the speed and accuracy of the diagnoses, by eliminating a significant source of disturbance input to the steer-by-wire system model. A method for reducing the effects of modeling uncertainty on diagnostic ...
متن کامل