Influence of electrode parameters on the performance of optically controlled MESFETs
نویسندگان
چکیده
The effects of electrode spacing on the optical response of illuminated MESFETs are analyzed. The analysis targets various optical performance factors including terminal photocurrent peak value, peak-time and discharge time. Whereas photocurrent peak value increases nonlinearly with electrode spacing, it was found that increasing the electrode spacing has a profound effect on the ability of the device to flush-out the optically generated carriers and hence more output delays are generated. A figure-of-merit has been defined to quantify the overall spacing effects. The simulation results show that optimum electrode spacing can be achieved. r 2007 Elsevier Ltd. All rights reserved.
منابع مشابه
Microwave performance of optically controlled MESFETs
This paper presents the characterization of illuminated high-frequency active devices using a time domain physical simulation model. The model is based on Boltztnann’s Transport Equation (BTE), which accurately accounts for carrier transport in microwave and millimeter wave devices with sub-micrometer gate lengths. Illumination effects are accommodated in the model to represent camer density ch...
متن کاملInvestigation the effect of substrate photo-electrode based on screen method on performance of dye-sensitized solar cells
In this paper we studied preparation of working films of dye-sensitized solar cells using screen printed method. The organic dye based on phenoltiazine with cyanoacrylic acid as the electron donor group utilized as photosensitizer. Fluorine-doped thin oxide FTO coated glass is transparent electrically conductive and ideal for use in dye-sensitized solar cells. FTO glass was coated by screen pri...
متن کاملVoltammetric Determination of Venlafaxine by Using Multiwalled Carbon Nanotube- Ionic Liquid Composite Electrode
The combination of multi-walled carbon nanotubes and ionic liquid 1-octylpyridinium hexaflourophosphate (OPFP) yields a carbon nanocomposite (MWCNT-CILE) that can be well used aselectrode for electrocatalytic oxidation of venlafaxine (VEN). The influence of variousexperimental parameters including pH of the solution, the amount of multi-walled carbon nanotubeused for the modification of the car...
متن کاملInfluence of nanostructured TiO2 film thickness on photoelectrode structure and performance of flexible Dye- Sensitized Solar Cells
A commercial Ti-Nanoxide was deposited on In-doped SnO2 (ITO) polymer substrates by tape casting technique with different thicknesses (7, 14 and 36μm) to be used as photoelectrode in flexible dye-sensitized solar cells (DSSCs). Ruthenium dye was adsorbed on each TiO2 film for 24 h. The resulting photoelectrodes were used to form flexible DSSCs in combination with...
متن کاملDesign and Fabrication of PVC Membrane Electrode Based on Netural Ligand (E)-N'-(1-(2-Hydroxyphenyl)Ethylidene)Benzohydrazi for Teramadol hydrochloride Measurement in Drugs and Biological Fluids
Here, a simple, quick, Low cost and sensitive Potentiometric method is described for tramadol hydrochloride measurement using .PVC membrane electrode based on neutral ligand (E)-N'-(1-(2-hydroxyphenyl)ethylidene)benzohydrazid. Besides, effect of various parameters like ionic additives, membrane solvent and pH on the Potentiometric response of the electrode are investigated. The best electrode p...
متن کامل