Optimization Mechanism of Additive of Composite Sodium Salts on Vanadium Oxidation of Siliceous Shale
نویسندگان
چکیده
The promotion of strengthening of vanadium oxidation by compound additive of sodium salts is described from the changes of the vanadium valence state and mineral phase. The results are as follows: during the roasting process, dehydroxy mica converts to the melt, which the composite system mainly contains Na, K, Al, Si, and O. Under the action of NaCl-Na2CO3, ion exchange between sodium and potassium promotes the crystallization of albite from the melt. Na2CO3 enhances the reactivity of quartz. The albite reacts with activated quartz, which promotes the migration of sodium ions and the generation of vanadate. Under the action of NaCl-Na2SO4, The crystallization of spinel in the melt is promoted and that of the albite is inhibited. Under the action of Na2SO4-Na2CO3, the permeability of ore is deteriorated. The ion exchange process and the vanadium oxidation is inhibited from the melt. The composite additive with three sodium salts shows a stronger promoting effect on vanadium oxidation. The contribution of NaCl and Na2CO3 to V(V) in roasted slag was the highest among three sodium salts. With a certain ratio of NaCl and Na2CO3, the low content of Na2SO4 did not significantly affect the V(V) content in roasted slag.
منابع مشابه
Vanadium extraction from a magnetite ore using alkaline roasting and acid leaching processes: optimization of parameters by response surface methodology
In this work, thealkaline roasting and sulfuric acid leaching processes were employed to extract vanadium from the magnetite ore of Saghand mine in central Iran. The response surface methodology based on the central composite design model was applied to optimize the parameters involved in the processes. The studied roasting parameters were temperature (900-1100 °C), sodium carbonate percentage ...
متن کاملHigh Temperature Oxidation Behaviour of Nimonic - 115 Alloy in Presence of Sodium Salts at 850OC
The high temperature oxidation behaviour of Nimonic-115 industrial alloy has been investigated in presence of NaNO3, Na2CO3 and Na2O2 at 850oC in flowing air. The oxidation kinetics and effect of salt deposition for the period of 48 h were studied. The scale morphologies were determined on the basis of X-ray diffraction anal...
متن کاملImproving Thermal Stability of Starch in Formate Fluids for Drilling High Temperature Shales
Starch is one of the most widely used biopolymers in water based drilling fluids to control fluid loss. The thermal stability of starch in common drilling fluids is low (93 °C). In this study, the thermal stability of starch has been evaluated in sodium/potassium formate and potassium chloride fluids. Samples of mud were prepared by formate salts (sodium and potassium) and potassium chloride wi...
متن کاملNano composite mixed-addenda vanadium substituted polyoxometalate-TiO2 as a green, reusable and efficient catalyst for rapid and efficient synthesis of symmetric disulfides under ultrasound irradiation
Mixed-addenda vanadium substituted polyoxometalate supported on anatase TiO2 crushed nano leaf was synthesized by an unusual reaction with titanium tetraisopropoxide at 100 ºC via sol–gel method under oil-bath condition. The materials characterized by XRD, TEM, IR and UV–vis techniques. In the present work, efficient oxidative of thiols with polyoxometalate-TiO2/hydrogen peroxide ...
متن کاملسینتیک تشویه پنتا اکسید وانادیم با کربنات سدیم
Vanadium is distributed widely and scarcely (150 ppm) on the earth. Its major applications are in steelmaking, dye-production and catalyst-fabrication industries. With the ever-increasing demand for this metal, secondary resource-exploitation of such waste materials as spent catalysts is recommended. Many reactions are involved in vanadium-extraction from these resources. Since roasting in comp...
متن کامل