Design of Sequential Circuit using Low Power Adiabatic Complementary Pass Transistor Logic
نویسنده
چکیده
Adiabatic logic style is Proving to be an attractive solution for low power digital design. The paper investigates low – power characteristics of complementary pass -transistor logic (CPL) circuits using AC power supply. The two-phase power-clock scheme is more suitable for the design of flip-flops and sequential circuits because it uses fewer transistors. The Adiabatic flip-flop have large energy saving over wide range of frequencies. In this paper, we use 180nm Tanner model Technology. Also analyzing the power dissipation of another adiabatic logic family i.e. CAL and comparing it with adiabatic CPL methodology.
منابع مشابه
Low Power Combinational and Sequential Circuits with Adiabatic Complementary Pass-Transistor Logic (ACPL)
This paper presents low-power characteristics of adiabatic complementary pass-transistor logic (ACPL) using four-phase AC power supply. Adiabatic CPL circuits consist of pure NMOS transistors, use CPL blocks for evaluation and bootstrapped NMOS switches to eliminate non-adiabatic loss of output loads. In this paper, combinational circuit (4-bit ripple carry adder) and sequential circuit (4-bit ...
متن کاملDesign of a low power high speed 4-2 compressor using CNTFET 32nm technology for parallel multipliers
In this article a low power and low latency 4-2 compressor has been presented. By using modified truth table and Pass Transistor Logic (PTL) a novel structure has been proposed which outperforms previous designs from the frequency of operation view point. The proposed design method has reduced the total transistor count considerably which will lead to reduced power consumption and smaller activ...
متن کاملDesign of a low power high speed 4-2 compressor using CNTFET 32nm technology for parallel multipliers
In this article a low power and low latency 4-2 compressor has been presented. By using modified truth table and Pass Transistor Logic (PTL) a novel structure has been proposed which outperforms previous designs from the frequency of operation view point. The proposed design method has reduced the total transistor count considerably which will lead to reduced power consumption and smaller activ...
متن کاملPhysical Implementation and Testing of Low-Power Adiabatic Flip-Flops with Energy-Recycling Pads
This paper presents adiabatic flip-flops based on CPAL (complementary pass-transistor adiabatic logic) circuits with energy-recycling output pad cells. The energy-recycling output pad cells for driving adiabatic chips include mainly bonding pads, ESD (electrostatic discharge) protection circuits, and two stage energy-recycling buffers. The adiabatic flip-flops and sequential circuits with energ...
متن کاملA Single-Phase Register File with Complementary Pass-Transistor Adiabatic Logic
This paper introduces an adiabatic register file based on two-phase CPAL (Complementary Pass-Transistor Adiabatic Logic circuits) with power-gating scheme, which can operate on a single-phase power clock. A 32×32 single-phase adiabatic register file with power-gating scheme has been implemented with TSMC 0.18μm CMOS technology. All the circuits except for the storage cells employ two-phase CPAL...
متن کامل