Property Comparisons and Bonding Efficiency of Uf and Pmdi Bonded Particleboards as Affected by Key Process Variables
نویسنده
چکیده
The purpose of this paper was to compare physical properties of conventional particleboard bonded with amounts of UF and PMDI resin and to examine the effect of mat moisture content (MC), wax content and platen temperature on their bonding efficiency, as determined by internal bond strength. It was found that PMDI not only gave superior board properties compared with the UF, but the amount required was reduced considerably as well. The MC of the mat and the platen temperature did not significantly affect the bonding efficiency of PMDI bonded boards, but the bonding efficiency of UF bonded boards. The inclusion of 1% wax significantly affected the bonding efficiency of both resins, however the loss in strength was higher in UF than in PMDI bonded boards.
منابع مشابه
Particleboard quality characteristics of saline jose tall wheatgrass and chemical treatment effect.
The objective of this research was to characterize the qualities (mechanical properties and water resistance) of particleboard made from saline Jose Tall Wheatgrass (JTW), Agropyron elongatum. For the JTW particleboards made with 4% polymeric methane diphenyl diisocyanate (PMDI), the mechanical properties and water resistance improved with the increase of particleboard density from 0.71 to 0.75...
متن کاملSelected properties of particleboard panels manufactured from rice straws of different geometries.
The objective is to evaluate the primary mechanical and physical properties of particleboard made from hammer-milled rice straw particles of six different categories and two types of resins. The results show the performance of straw particleboards is highly dependent upon the straw particle size controlled by the opening size of the perforated plate inside the hammer-mill. The static bending an...
متن کاملBonding of Agrofibers-based t]omposition Panels
Urea formaldehyde resins were formulated with vatiables of three reaction pHs (1.0, 4.8, and 8.0 5.0) and three catalysts (sodium hydroxide, sodium hydroxide/ammonium mix, and triethanolamine) . The resins were prepared by placing all formaldehyde and water in reaction kettle and pH was adjusted with sulfnric acid and sodium hydroxide, respectively. Urea was added in 1.5 equal parts at 1 minute...
متن کاملPreparation and Mechanical Characterization of Particleboard Made from Maritime Pine and Glued with Bio-adhesives Based on Cornstarch and Tannins♣
In this presented work, we describe the development and characterization of a new, environmentally friendly adhesive derived from cornstarch and tannins. The production of wood composites mainly relies on the petrochemical-based and formaldehyde-based adhesives such as urea formaldehyde (UF), phenol formaldehyde (PF) and melamine urea formaldehyde (MUF), which can generate under certain conditi...
متن کاملThe Effect of Décor Paper and Resin Type on the Physical, Mechanical, and Surface Quality Properties of Particleboards Coated with Impregnated Décor Papers
The objective of this study is to evaluate the effect of décor paper and resin type on physical properties, mechanic properties, and surface quality properties of particleboards coated with décor papers impregnated by using different resin. White oak, New wenge and common maple pattern decor papers impregnated with urea formaldehyde (UF), melamine formaldehyde (MF) and urea-melamine formaldehyd...
متن کامل