Bifurcated Mechanical Behavior of Deformed Periodic Porous Solids
نویسندگان
چکیده
The transformation of periodic microporous structures fabricated by interference lithography followed by their freezing below glass transition is described. Periodic porous microstructures subjected to internal compressive stresses can undergo sudden structural transformation at a critical strain. The pattern transformation of collapsed pores is caused by the stresses originated during the polymerization of acrylic acid (rubbery component) inside of cylindrical pores and the subsequent solvent evaporation in the organized microporous structure. By confining the polymerization of acrylic acid to localized porous areas complex microscopic periodic structures can be obtained. The control over the mechanical instabilities in periodic porous solids at a sub-micron scale demonstrated here suggests the potential mechanical tunability of photonic, transport, adhesive, and phononic properties of such periodic porous solids.
منابع مشابه
Synthesis and Characterization of Mechanical Behavior and Thermal Shock Resistance of Macro-Porous SiC Solar Absorber
The concentrated solar power (CSP) is one of the renewable energy sources in which solar irradiation heat energy will be used in a steam turbine to generate electrical grid. Solar radiation is absorbed by a solar receiver reactor on the surface of a porous solar absorber. In this survey, synthesis and mechanical/thermal characterization of micro-porous silicon carbide (SiC) absorber to be used ...
متن کاملChapter 1 Poromechanics of saturated isotropic nanoporous materials
1.1 Abstract Poromechanics offers a consistent theoretical framework for describing the mechanical response of porous solids. When dealing with fully saturated nanoporous materials, which exhibit pores of the nanometer size, additional effects due to adsorption and confinement of the fluid molecules in the smallest pores must be accounted for. From the mechanical point of view, these phenomena ...
متن کاملInstabilities and pattern transformation in periodic, porous elastoplastic solid coatings.
Pattern transformation in periodic microporous elastoplastic solid coatings is caused by a buckling of the struts and a rotation of the nodes under compressive stresses. The results of a nonlinear numerical investigation confirm the critical role of the bifurcation of the periodic solid under compressive stresses. In striking contrast to the earlier observations of elastic instabilities in poro...
متن کاملErratum Mechanics of the human red blood cell deformed by optical tweezers [ Journal of the Mechanics and Physics of Solids , 51 ( 2003 ) 2259 - 2280 ]
Mechanics of the human red blood cell deformed by optical tweezers [Journal of the Mechanics and Physics of Solids, 51 (2003) 2259-2280] M. Dao, C.T. Lim, S. Suresh Department of Materials Science and Engineering, Massachusetts Institute of Technology, 77 Massachusetts Avenue, Cambridge, MA 02139, USA Division of Bioengineering and Department of Mechanical Engineering, The National University o...
متن کاملDetermination of Periodic Solution for Tapered Beams with Modified Iteration Perturbation Method
In this paper, we implemented the Modified Iteration Perturbation Method (MIPM) for approximating the periodic behavior of a tapered beam. This problem is formulated as a nonlinear ordinary differential equation with linear and nonlinear terms. The solution is quickly convergent and does not need complicated calculations. Comparing the results of the MIPM with the exact solution shows that this...
متن کامل