Triple - Band Printed Dipole Tag Antenna For
نویسنده
چکیده
Abstract—In this paper, a triple-band printed dipole tag antenna is proposed for Radio Frequency Identification (RFID). The tripleband printed dipole antenna is designed to operate at 0.92GHz, 2.45GHz and 5.8 GHz using Computer Simulation Technology (CST) software. In order to achieve triple-band operation, the proposed antenna contains two branch elements, which act as an additional resonator. The designed antenna is fabricated using Taconic RF-35 substrate with a dielectric constant (εr) of 3.5 and thickness (d) of 0.508mm. The antenna’s parameters for triple-band operation are investigated and discussed. Then, this fabricated antenna is integrated with a UHF microchip to become a passive UHF tag. This tag is tested by measuring the reading distance and it is found that the proposed tag can be used for RFID application.
منابع مشابه
Triple-band Printed Dipole Tag Antenna for RFID Application
In this paper, a triple-band printed dipole tag antenna is proposed for RFID application. The tri-band printed dipole antenna is designed at 0.92 GHz, 2.45 GHz and 5.8 GHz using Computer Simulation Technology (CST). In order to achieve triple-band operation, the proposed antenna contains two branch elements, which acts as an additional resonator. The designed antenna was fabricated using Taconi...
متن کاملA Multi Band Mini Printed Omni Directional Antenna with V-shaped for Rfid Applica- Tions
This paper presents a mini multi-band printed omnidirectional antenna with v-shaped structure for radio frequency identification (RFID) applications. The proposed multi-band antenna is developed from the initial v-shaped design which is only capable of working as a single-band antenna. By deploying a concept of dipole antenna to an initial design, the proposed antenna is accomplished to operate...
متن کاملDesign, Simulation and implementation of active dual-band dipole antenna using a series stub
In this paper, a new method for designing an active dual-band dipole antenna is proposed. The operating frequencies of the proposed antenna are 150 and 450 MHz that are usually used in military applications. Using a series stub is the main idea in the proposed dual-band antenna, where it makes an independent resonance frequency higher than the main resonance frequency of a conventional dipole. ...
متن کاملDual-Band Loop-Loaded Printed Dipole Antenna with a Wideband Microstrip Balun Structure
─ A novel loop-loaded printed dipole (LLPD) with a wideband balun structure is presented for aiming a dual-band antenna operation at 3.0/5.5 GHz bands. The proposed balun structure alone demonstrates VSWR<1.5 performance over a 3:1 bandwidth. As the loop elements placed on the antenna aperture provides dual-band operation with at least 15% impedance bandwidths, the wideband balun/feed allows fo...
متن کاملNew Low Cost Printed Antenna CPW-Fed for Global Positioning System, Personal Communication System and Worldwide Interoperability for Microwave Access Band Applications (TECHNICAL NOTE)
This paper presents a new design of a CPW-Fed multi bands planar antenna. This antenna can be integrated easily with passive and active elements. The proposed antenna is suitable to operate for GPS, PCS and WiMAX bands. Its entire area is 52.3x52.6mm2 and is employed on an FR-4 epoxy substrate and fed by a 50 Ohm coplanar line. The antenna parameters have been analyzed and optimized by using AD...
متن کامل