Enthalpies of mixing of liquid ternary Co–Li–Sn alloys
نویسندگان
چکیده
ABSTRACT The partial and integral molar enthalpies of mixing of liquid Co-Li-Sn alloys were determined using drop calorimetry. The investigations were performed along six sections by the addition of lithium to mixtures with the compositions [Formula: see text]/[Formula: see text] ≈ 2:98, [Formula: see text]/[Formula: see text] ≈ 1:9, and [Formula: see text]/[Formula: see text] ≈ 3:17 as well as by the addition of cobalt to mixtures with the compositions [Formula: see text]/[Formula: see text] ≈ 3:17, [Formula: see text]/[Formula: see text] ≈ 1:2, and [Formula: see text]/[Formula: see text] ≈ 1:1 at a temperature of 1,173 K. The Co-Li-Sn system shows exothermic behavior of the integral molar enthalpy of mixing in the investigated concentration range. The integral molar enthalpy of mixing of liquid Co-Li system was calculated by Miedema's model to fit our measured ternary data using an extended Redlich-Kister-Muggianu model for substitutional solutions. GRAPHICAL ABSTRACT
منابع مشابه
The Enthalpies of Mixing of Liquid Ni-Sn-Zn Alloys
The partial and integral enthalpies of mixing of liquid ternary Ni-Sn-Zn alloys were determined. The system was investigated along two sections xNi/xSn ≈ 1:9, xNi/xSn ≈ 1:6 at 1073 K and along two sections xSn/xZn ≈ 9:1, xSn/xZn ≈ 4:1 at 873 K. The integral enthalpy of mixing at each temperature is described using the Redlich-Kister-Muggianu model for substitutional ternary solutions. In additi...
متن کاملDetermination of the Mixing Thermodynamic Properties of Liquid Ternary Alloys by Fitting the Knudsen Effusion Mass Spectrometric Data to the Redlich-Kister-Muggianu Sub-Regular Solution Model
We discuss the vaporisation of four liquid ternary-alloy systems, namely, Cu-In-Sn, Ag-In-Sn, Al-Cu-Sn and Cu-Sb-Sn, on the basis of our previous Knudsen effusion mass spectrometric (KEMS) investigations of these systems. The thermodynamic activities and the thermodynamic functions (Gibbs energy, enthalpy, entropy) of mixing were determined using selected standard KEMS procedures (i.e., Simple ...
متن کاملEnthalpy Effect of Adding Cobalt to Liquid Sn-3.8Ag-0.7Cu Lead-Free Solder Alloy: Difference between Bulk and Nanosized Cobalt
Heat effects for the addition of Co in bulk and nanosized forms into the liquid Sn-3.8Ag-0.7Cu alloy were studied using drop calorimetry at four temperatures between 673 and 1173 K. Significant differences in the heat effects between nano and bulk Co additions were observed. The considerably more exothermic values of the measured enthalpy for nano Co additions are connected with the loss of the...
متن کاملHeat of Mixing and Activities in Liquid Al-Sn Alloys
für Naturforschung in cooperation with the Max Planck Society for the Advancement of Science under a Creative Commons Attribution 4.0 International License. Dieses Werk wurde im Jahr 2013 vom Verlag Zeitschrift für Naturforschung in Zusammenarbeit mit der Max-Planck-Gesellschaft zur Förderung der Wissenschaften e.V. digitalisiert und unter folgender Lizenz veröffentlicht: Creative Commons Namen...
متن کاملLiquid-liquid phase separation of freely falling undercooled ternary Fe-Cu-Sn alloy.
The active modulation and control of the liquid phase separation for high-temperature metallic systems are still challenging the development of advanced immiscible alloys. Here we present an attempt to manipulate the dynamic process of liquid-liquid phase separation for ternary Fe47.5Cu47.5Sn5 alloy. It was firstly dispersed into numerous droplets with 66 ~ 810 μm diameters and then highly unde...
متن کامل