Multiwalled Carbon Nanotubes as Single Electron Transistors
نویسندگان
چکیده
Single electron transistors (SET) are fabricated from multiwalled carbon nanotubes (MWNT) by manipulation with an atomic force microscope. The devices consist of either a single MWNT with Au contacts at the ends or of two crossing tubes. In the latter device, the lower nanotube acted as the central island of a single electron transistor while the upper one functioned as a gate electrode. Coulomb blockade oscillations were observed on the nanotube at low temperatures. The voltage noise of the nanotube-SET was gain dependent as in conventional SETs. The charge sensitivity at 10 Hz was 6x10~ e/VHz. Furthermore, in another device where the MWNT is suspended above the substrate between the electrodes, we measure an extremely high charge sensitivity of 6x10~ e/VHz at 45 Hz, comparable to the best of the conventional SETs.
منابع مشابه
Single-electron transistor made of multiwalled carbon nanotube using scanning probe manipulation
Please cite the original version: Roschier, Leif & Penttilä, Jari & Martin, Michel & Hakonen, Pertti J. & Paalanen, Mikko & Tapper, Unto & Kauppinen, Esko I. & Journet, Catherine & Bernier, Patrick. 1999. Single-electron transistor made of multiwalled carbon nanotube using scanning probe manipulation. Applied Physics Letters. Volume 75, Issue 5. 728-730. ISSN 0003-6951 (printed). DOI: 10.1063/1...
متن کاملCharacterization of multiwalled carbon nanotube-polymethyl methacrylate composite resins as denture base materials.
STATEMENT OF PROBLEM Most fractures of dentures occur during function, primarily because of the flexural fatigue of denture resins. PURPOSE The purpose of this study was to evaluate a polymethyl methacrylate denture base material modified with multiwalled carbon nanotubes in terms of fatigue resistance, flexural strength, and resilience. MATERIAL AND METHODS Denture resin specimens were fab...
متن کاملPreparation and Characterization of Multiwalled Carbon Nanotubes-Polythiophene Nanocomposites and its Gas Sensitivity Study at Room Temperature
The nanocomposites of polythiophene and carboxylated multiwalled carbon nanotubes (MWCNTs) were synthesized by in-situ chemical oxidative polymerization method using anhydrous ferric chloride (FeCl3) as an oxidant. The MWCNTs functionalized and ultrasonicated to obtain uniform dispersion within the polythiophene matrix. Field emission scanning electron microscopy was used to characterize the mo...
متن کاملNonlinear Vibration Analysis of Embedded Multiwalled Carbon Nanotubes in Thermal Environment
In this article, based on the Euler-Bernoulli beam theory, the large-amplitude vibration of multiwalled carbon nanotubes embedded in an elastic medium is investigated. The method of incremental harmonic balance is implemented to solve the set of governing nonlinear equations coupled via the van der Waals (vdW) interlayer force. The influences of number of tube walls, the elastic medium, nanotub...
متن کاملCarbon nanotubes with covalently linked porphyrin antennae: photoinduced electron transfer.
Single- and multiwalled carbon nanotubes have been covalently functionalized with free-base porphyrin. The quantity of porphyrin linked to the surface was determined from thermogravimetric and UV-vis analysis. A reversible protonation equilibrium between the attached porphyrin and the residual acid groups of the carbon nanotubes has been identified. Steady-state fluorescence emission spectrum o...
متن کامل