Some factors influencing specific gravity determinations on gold cast alloys.
نویسنده
چکیده
منابع مشابه
Optimizing and Stabilizing the Gas Lift Operation by Controlling the Lift Gas Specific Gravity
One of the factors which affects the gas lift performance is specific gravity of a lift gas (or the Molecular weight), which can influence the gas solubility in oil and has a direct effect on the gas lift performance. There are some previous researches which have included the lift gas specific gravity in their modeling, but in none of them, a comprehensive research about the effect of lift gas ...
متن کاملBond Strength of Gold Alloys Laser Welded to Cobalt-Chromium Alloy
The objective of this study was to investigate the joint properties between cast gold alloys and Co-Cr alloy laser-welded by Nd:YAG laser. Cast plates were fabricated from three types of gold alloys (Type IV, Type II and low-gold) and a Co-Cr alloy. Each gold alloy was laser-welded to Co-Cr using a dental laser-welding machine. Homogeneously-welded and non-welded control specimens were also pre...
متن کاملFractal-like behaviour of the BCC/FCC phase separation in the iron-gold alloys.
Iron-gold alloys with compositions Fe(70)Au(30) and Fe(50)Au(50) were prepared by arc melting. The alloys were investigated by means of the high-resolution scanning electron microscopy (SEM-FEG) in the as-cast state and upon annealing in two steps, i.e. at 250 degrees C for 24 h and subsequently at 500 degrees C for 48 h. The alloys were composed of two phases, i.e. a BCC phase rich in iron and...
متن کاملDiagnostic Value of Measurement Specific Gravity by Refractometric and Dipstick Method in Differentiation between Transudate and Exudate in Pleural and Peritoneal Fluid
Background: Accumulation of pleural and peritoneal fluid is seen in some diseases. In order to diagnose the disease and start the treatment, one of the most important actions will be to differentiate between exudates and transudates. The objective of this study was to determine the diagnostic value of measuring the specific gravity of the fluid through...
متن کاملLong-term follow-up of conical crown-retained dentures fabricated using different technologies.
This study presents the results of a long-term clinical evaluation of conical crown-retained dentures fabricated using different technologies. Four different material connections between the outer and inner crowns were used: cast gold/cast gold, cast gold/electroforming, nonprecious alloy/electroforming, and titanium abutment/electroforming. Technical failures and retention values were assessed...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- Journal of dental research
دوره 45 2 شماره
صفحات -
تاریخ انتشار 1966