3D Architecture Modeling and Exploration

نویسندگان

  • Jason Cong
  • Eren Kursun
  • Yongxiang Liu
  • Yuchun Ma
  • Glenn Reinman
چکیده

Vertical integration (3D ICs) has demonstrated the potential to reduce inter-block wire latency through flexible block placement and routing. However, there is an untapped potential for 3D ICs to reduce intra-block wire latency through architectural designs that can leverage multiple silicon layers in innovative ways. Furthermore, it is particularly challenging to simultaneously explore the physical design space and microarchitectural space for vertical integration. The physical design space typically has no information on the microarchitectural impact of latency optimization, and the microarchitectural space has no information on the physical design impact of different architectural alternatives. We make the following contributions in this paper: (1) the introduction of port partitioning, a new approach to constructing multi-layer blocks; (2) the extension of a microarchitectural exploration tool to include the ability to model multilayer blocks and to consider these blocks as alternative implementations of single-layer architectural blocks on the fly, within a single floorplanning run; and (3) the evaluation of vertical integration on a design driver using this framework. For this design driver, we see an average 36% improvement in performance (measured in BIPS) over a single-layer architecture, and a 29% improvement in performance over a multi-layer architecture with single-layer blocks. The on-chip temperature is kept below 40C.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Systemc Modeling for 3d Graphics Hardware Acceleration

Due to the growing complexity of system architecture current today, the system modeling is utilized in the early design under the time-to-market. To establish a 3D graphics acceleration platform, we need to explore the system architecture and performance issues. In this paper, we use SystemC to model our hardware models including accelerator, SDRAM memory, and graphics engine (GE) for investiga...

متن کامل

Application of Architectural Visual Documents and Oral History of in the Representation of Micro-Spaces and Three-Dimensional (3D) Modeling of Nawab Razavi Historical House in Yazd

Over the time, various factors have led to damage the Iranian houses. By examining the surviving documents of Nawab Razavichr('39')s house in Yazd, it is possible to represent a major part of the lost spaces and also to minimize speculation in the restoration of this historic house. The basic belief of this research is that the studies of the oral history of architecture as well as the existing...

متن کامل

Correlation between IP and Rs and grade data in modeling and evaluation of a copper deposit, case study: the Sarbisheh copper deposit, Iran

This paper addresses the application of integrated chargeability and resistivity method and grade data in modeling and evaluation of copper deposits. We argue that the relationship between IP, Rs and grade data may be used for modeling and reserve estimation and tested this argument for Sarbisheh copper deposit that is located in eastern Iran. Geology and mineralization situation of Sarbisheh d...

متن کامل

Efficient Representation in 3D Environment Modeling for Planetary Robotic Exploration

Good situation awareness is an absolute must when operating mobile robots for planetary exploration. 3D sensing and modeling data gathered by the robot are hence crucial for the operator. But standard methods based on stereo vision have their limitations, especially in scenarios where there is no or only very limited visibility, e.g., due to extreme light conditions. 3D Laser Range Finders (3D-...

متن کامل

Physically Constrained Design Space Modeling for 3D CPUs

Design space exploration (DSE) is becoming increasingly complex as the number of tunable design parameters increases in cutting edge CPU designs. The advent of 3D integration compounds the problem by expanding the architectural design space, causing intricate links between memory and logic behavior and increasing the interdependence between physical and architectural design. Exhaustive simulati...

متن کامل

Modeling Breast Acini in Tissue Culture for Detection of Malignant Phenotype Reversion to Non-Malignant Phenotype

Backgrounds: Evidence is accumulating to support disruption of tissue architecture as a powerful event in tumor formation. For the past four decades, intensive cancer research with the premise of “cancer as a cell based-disease” focused on finding oncogenes or tumor suppressor genes. However, the role of the tissue architecture was neglected. Three dimensional (3D) cell cultures which can recap...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2008