Modeling of Diesel Combustion, Soot and NO Emissions Based on a Modified Eddy Dissipation Concept
نویسندگان
چکیده
Combustion Science and Technology Publication details, including instructions for authors and subscription information: http://www.informaworld.com/smpp/title~content=t713456315 Modeling of Diesel Combustion, Soot and NO Emissions Based on a Modified Eddy Dissipation Concept Sangjin Hong a; Margaret S. Wooldridge a; Hong G. Im a; Dennis N. Assanis a; Eric Kurtz b a Mechanical Engineering Department, University of Michigan, Ann Arbor, Michigan, USA b Ford Motor Company, Dearborn, Michigan, USA
منابع مشابه
Modeling of Diesel Combustion , Soot and NO Emissions Based on a Modified Eddy Dissipation
2 Abstract`A three-dimensional reacting flow modeling approach is presented for predictions of compression ignition, combustion, NOx and soot emissions over a wide range of operating conditions in a diesel engine. The ignition/combustion model is based on a modified eddy dissipation concept (EDC) which has been implemented into the KIVA 3V engine simulation code. The modified EDC model is used ...
متن کاملMulti-Dimensional Modeling of the Effects of Split Injection Scheme on Combustion and Emissions of Direct-Injection Diesel Engines at Full Load State
One of the important problems in reducing pollutant emission from diesel engines is trade-off between soot and NOx. Split injection is one of the most powerful tools that decrease soot and NOx emissions simultaneously. At the present work, the effect of split injection on the combustion process and emissions of a direct-injection diesel engine under full-load conditions is investigated by the c...
متن کاملThree-Dimensional Modeling of Combustion Process, Soot and NOx formation In a Direct-injection Diesel Engine
This paper is presented to study the combustion process and emissions in a direct injection diesel engine. Computations are carried out using a three-dimensional model for flows, sprays, combustion and emissions in Diesel engines. Interactions between combustion and emissions with flow field are considered and it is shown that soot mass fraction increases at regions with low turbulence inten...
متن کاملMulti-Dimensional Modeling of the Effects of Spilt Injection Scheme on Performance and Emissions of IDI Diesel Engines
One of the important problems in reducing of pollutant emission from DI and IDI diesel engines is trade-off between soot and NOx. Split injection is one of the most powerful tools that makes the chance to shift the trade-off curve closer to origin. At the present work, the effect of split injection on the combustion process and emissions of a cylinder IDI diesel engine under the specification...
متن کاملNumerical Investigation on the Effect of Injection Timing on Combustion and Emissions in a DI Diesel Engine at Low Temperature Combustion Condition
One promising way to achieve low temperature combustion regime is the use of a large amount of cooled EGR. In this paper, the effect of injection timing on low temperature combustion process and emissions were investigated via three dimensional computational fluid dynamics (CFD) procedures in a DI diesel engine using high EGR rates. The results show when increasing EGR from low levels to levels...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2008