DETERMINATION OF THE DECOMPOSITION BOUNDARY OF CaCO3 AT HIGH TEMPERATURE: IMPLICATIONS FOR IMPACT-INDUCED DEGASSING OF CaCO3
نویسندگان
چکیده
IMPLICATIONS FOR IMPACT-INDUCED DEGASSING OF CaCO3. K. Ishibashi, T. Yagi, and T. Matsui, Dept. of Earth Planet. Sci., Univ. of Tokyo (7-3-1, Hongo, Bunkyo-ku, Tokyo, 113-0033, Japan; [email protected]), 2 Institute for Solid State Physics, Univ. of Tokyo (5-1-5, Kashiwanoha, Kashiwa, Chiba, 277-8581, Japan), Dept. of Complexity Sci. and Eng., Univ. of Tokyo (5-1-5, Kashiwanoha, Kashiwa, Chiba, 277-8561, Japan).
منابع مشابه
Manufacture of Aluminum Closed-cell Foam by ARB process using CaCO3 as the blowing agent
Metal porous foams have been eliciting much interest in recent years due to their high capacity of energy absorption. The characteristics of the pores in these materials play an important role on their energy absorption capability and other properties. This study reports the fabrication of aluminum closed-cell foams by accumulative roll-bonding (ARB) technique using calcium carbonate (CaCO3) as...
متن کاملThe effect of biological activity, CaCO3 mineral dynamics, and CO2 degassing in the inorganic carbon cycle in sea ice in late winter-early spring in the Weddell Sea, Antarctica
[1] A large-scale geographical study of the ice pack in the seasonal ice zone of the Weddell Sea, Antarctica, took place from September to October 2006. Sea ice brines with a salinity greater than 58 and temperature lower than 3.6 C were sampled from 22 ice stations. The brines had large deficits in total alkalinity and in the concentrations of the major dissolved macronutrients (total dissolve...
متن کاملبررسی عوامل حبابزای TiH2و CaCO3 بر ساختار وخواص کامپوزیت فومی Al-7%Si-3%SiC
In this paper, the effect of TiH2 and CaCO3 blowing agents was investigated on the structure and energy absorption of Al-7%Si-3%SiC composite metal foam by powder compact route. Composition of the foam was prepared from a mixture of Al, SiC and Si powders. Then, precursors were consolidated in H13 die mould by cold and uni-axial pressing at 110 MPa and at room temperature. The pressed precursor...
متن کاملSynthesis and Characterization of Polyamide-66/Calcium Carbonate Composites
Polyamide-66(PA66)/CaCO3 micro- and nano-composites were prepared using a polymer solution method at filler loading of 0, 1, 2 and 3 weight percent. Nano-size of CaCO3 was synthesized by micro-emulsion technique. The material was characterized by XRD, SEM, FTIR and UV-VIS techniques. XRD results of composites suggested that CaCO3 particles are found in the amorphous phase of the semi-crystallin...
متن کاملThermal Decomposition Kinetics of Poly(L-lactic acid) after Heat Treatment
Thermal decomposition behavior of Poly(L-lactic acid) (PLLA) and PLLA composites after different heat treatment were investigated using thermogravimetric analysis. Firstly, the thermal decomposition results of neat PLLA showed that the decomposition of PLLA was a first-order kinetic reaction, and thermal decomposition kinetics indicated that the heat treatment significantly affected activation ...
متن کامل