Optimizing the Design of Radial/Axial PMSM and SRM used for Powered Wheel-Chairs
نویسندگان
چکیده
the paper presents the optimization results for several electrical machines dedicated for powered electric wheel-chairs. The optimization, using the Hook-Jeeves algorithm, was employed based on a design approach which takes into consideration the road conditions. Also, through numerical simulations (based on finite element method), the analytical approach was validated. The optimization approach gave satisfactory results and the best suited variant was chosen for the motorization of the wheel-chair. Keywords—electrical machines, numerical validation, optimization, electric wheel chair.
منابع مشابه
A High Torque Density Axial Flux SRM with Modular Stator
A novel structure of switched reluctance motors (SRMs) is proposed. The proposed structure uses the benefits of the axial flux path, short flux path, segmental rotor, and flux reversal free stator motors all together to improve the torque density of the SRMs. The main geometrical, electrical and physical specifications are presented. In addition, some features of the proposed structure are comp...
متن کاملA New Method for Computation of Axial Flux Permanent Magnet Synchronous Machine Inductances under Saturated Condition
Accurate computing of the saturated inductances of Permanent Magnet Synchronous Machine (PMSM) is very important during the design process. In this paper, a new method is presented based on the B-H characteristic of the stator material and unsaturated inductances formulations. This method is used to calculate the saturated inductances of the axial flux PMSM. The synchronous inductance and all o...
متن کاملRobust Controller Design Based-on Aerodynamic Load Simulator Identification Driven by PMSM for Hardware-in-the-Loop Simulations
Aerodynamic load simulators generate the required time varying load to test the actuator’s performance in the laboratory. Electric Load Simulator (ELS) as one of variety of the dynamic load simulators should follows the rotation of the Under Test Actuator (UTA) and applies the desired torque to UTA’s rotor at the same time. In such a situation, a very large torque is imposed to the ELS from the...
متن کاملVarious Types of Wheel Chair Control Methods : A
The purpose of this review is to highlight the wide array of interfaces developed so far to control wheel chairs. A preliminary study on wheel chair interfaces is presented. This is followed by various types of powered wheel chair control methods such as hand, voice, communication methods and hybrid. Wheel chair control methods for persons with reduced strength are also explained. Apart from al...
متن کاملDesign and Control of PMSM for In-Wheel Motor Electric Vehicle Application Based on 3D Transient FEA
Permanent Magnet Synchronous Machine (PMSMs) are considered as the promising electromagnetic structure, especially for In-Wheel motor electric and hybrid propulsion applications. The design for a direct-drive wheel motor PMSM require a 3D Finite Element Analysis (FEA) based investigation of the output torque especially when the end winding is considered and in the case of skewed machine, this p...
متن کامل