Statistical study of single and multiple pulse laser-induced damage in glasses.

نویسندگان

  • L Gallais
  • J Natoli
  • C Amra
چکیده

Single and multiple pulse laser damage studies are performed in Suprasil silica and BK-7 borosilicate glasses. Experiments are made in the bulk of materials at 1.064microm with nanosecond pulses, using an accurate and reliable measurement system. By means of a statistical study on laser damage probabilities, we demonstrate that the same nano-precursors could be involved in the multiple shot and single shot damage process. A damage mechanism with two stages is then proposed to explain the results. Firstly, a pre-damage process, corresponding to material changes at a microscopic level, leads the precursor to a state that can induce a one-pulse damage. And secondly a final damage occurs, with a mechanism identical to the single shot case. For each material, a law is found to predict the precursor life-time. We can then deduce the long term life of optical elements in high-power laser systems submitted to multipulse irradiation.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Luminescence in the fluoride-containing phosphate-based glasses: A possible origin of their high resistance to nanosecond pulse laser-induced damage

Fusion power offers the prospect of an almost inexhaustible source of energy for future generations. It was reported that fusion fuel gains exceeding unity on the National Ignition Facility (NIF) were achieved, but so far great deal of scientific and engineering challenges have to be overcome for realizing fusion power generation. There is a bottleneck for color-separation gratings in NIF and o...

متن کامل

Design of the [SiO2/ZrO2] photonic crystal filter for application in 350-nm laser safety glasses

In this paper, a one-dimensional photonic crystal filter based on the [SiO2/ZrO2] bilayer have been designed for application in safety glasses for working in 350-nm wavelength. High power lasers with low wavelength e.g. 350-nm have very high power which can cause serious damage to the operator’s eyes. In this paper using the transfer matrix method and theoretical calculation in MATLAB software ...

متن کامل

Theoretical and Experimental Study on Femtosecond Laser-induced Damage in MgF2 Crystals

We study single-shot damage morphology of MgF2 irradiated under 800 nm laser using scanning electronic microscope (SEM). The dependence of damage threshold on laser pulse width is measured by the linear relationship between the area of damage spot and the logarithm of laser energy. The pulse duration ranges from 55 fs to 750 fs. We develop the multiple-equation model (Phys. Rev. Lett. Vol.92, p...

متن کامل

Picosecond UV laser induced morphological, biochemical and biological changes in Bombyx mori

Background: In the light of various applications of UV laser in biological system, we have investigated the effect of picosecond UV laser radiation on silkworm Bombyx mori. Materials and Methods: The eggs of NB4D2 of different stages were exposed to pico second pulse laser at 355 nm from Nd:YAG laser for different durations. Results: Due to irradiation alterations in crescent larval body...

متن کامل

Optical Opacity of Laser Induced Plasma in Distilled Water with NaCl and TiO2 Nanoparticles Impurities

In this paper, the dynamic behavior of laser induced optical breakdown in impure water was studied by using a pump- probe technique. The plasma was induced by a 1064 nm Nd:YAG laser pulse (with pulse duration ~10 ns) in distilled water with two types of impurities: (I) a solution (highly diluted salt water as a conductor) and (II) a colloidal (TiO2 in colloidal nanoparticle form as a dielectric...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:
  • Optics express

دوره 10 25  شماره 

صفحات  -

تاریخ انتشار 2002