Efficient Simulation and Optimization of Rotationally Symmetric, Converging-Diverging de Laval Nozzles for Twin Wire Arc Spraying
نویسندگان
چکیده
Recent developments in the design of rotationally symmetric, convergingdiverging de Laval nozzles for the use in twin wire arc spraying processes are discussed. Various aspects of an efficient implementation of the proposed gas dynamics solution algorithm on modern multiand many-core architectures are addressed. Finally, a general framework for the application of massively parallel, derivative-free optimization methods on cluster systems is presented.
منابع مشابه
ایجاد لایه سوپرآلیاژ بر روی فوم های نیکلی توسط عملیات پاشش گرمایی
Open pore metallic foams can be used for high temperature, high performance heat exchanger due to their high gas permeability and heat conductivity provided that skins properly attach to the foam’s struts on the surface. In the current study, a novel process was successfully developed to fill pores on the surface of the foam sheet in order to deposit skin on the foam specimens by thermal sprayi...
متن کاملEFFECT OF NOZZLE DIAMETER AND ATOMIZING AIR PRESSURE ON CHARACTERISTICS OF IN-FLIGHT PARTICLES IN WIRE ARC SPRAYING
In wire arc spraying, the atomizing air pressure and applied nozzle system are important factors influencing particles characteristics and coating quality. The aim of this paper is to study how the characteristics of particles such as size, velocity and temperature are influenced by the operating conditions in wire arc spray. For that, three types of wires are tested: solid wire of stainless st...
متن کاملSpace Advantage Provided by De - Laval Nozzle and Bell Nozzle over Venturi
Abstract:-The FSAE guidelines state that it is mandatory for each and every car participating in the said event to have a single circular 20mm restrictor in the intake system. All the air flowing to the engine must pass through this restrictor. Conventionally, a Venturi Nozzle is used as a restrictor. In our research, we have proposed two Nozzles: De-Laval Nozzle and Bell Nozzle as an alternati...
متن کاملThe Effect of Transient Nozzle Flow on Detonation Tube Impulse
Impulse generation with gaseous detonation requires conversion of chemical energy into mechanical energy. Because of the poor performance of straight detonation tubes compared to conventional propulsion systems and the success of using nozzles on rocket engines, the effect of nozzles on detonation tubes is being investigated. The first experimental investigation measuring impulse by gaseous det...
متن کاملThe Theoretical and Experimental Investigation into Technological Parameters of High-Melting Metal Arc Spraying
The experimental study is done for technological parameters of high-melting metal arc spraying to study the influence of spraying current, spraying voltage and wire feed voltage on spraying arc and the influence of spraying current on coating temperature and analyze theoretically the distribution rules of spray gun jet speed field and temperature field and their influencing factors. The results...
متن کامل