Prosthetic Limb Vacuum Systems

ثبت نشده
چکیده

The Vacuum Assisted Socket System (VASS), developed by Total Environmental Control (TEC), is a specialized device used with artificial limbs to manage residual limb volume fluctuation in amputees. The system consists of a TEC liner, suspension sleeve and air evacuation pump. The device creates an elevated vacuum between the liner and the socket wall. The elevated vacuum promotes natural fluid exchange that regulates volume fluctuation in the residual limb, reduces forces to the residual limb, and increases suspension and proprioception. The manufacturer claims that the enhanced linkage from the vacuum between the liner and the socket wall decreases weight and promotes an improved gait.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Methods for characterization of mechanical and electrical prosthetic vacuum pumps.

Despite increasingly widespread adoption of vacuum-assisted suspension systems in prosthetic clinical practices, there remain gaps in the body of scientific knowledge guiding clinicians' choices of existing products. In this study, we identified important pump-performance metrics and developed techniques to objectively characterize the evacuation performance of prosthetic vacuum pumps. The sens...

متن کامل

Elevated vacuum suspension preserves residual-limb skin health in people with lower-limb amputation: Randomized clinical trial.

A growing number of clinical trials and case reports support qualitative claims that use of an elevated vacuum suspension (EVS) prosthesis improves residual-limb health on the basis of self-reported questionnaires, clinical outcomes scales, and wound closure studies. Here, we report first efforts to quantitatively assess residual-limb circulation in response to EVS. Residual-limb skin health an...

متن کامل

A comparison of trans-tibial amputee suction and vacuum socket conditions.

Daily volume loss of the stump leads to a poor fit of the prosthetic socket. A method of preventing this volume loss and maintaining a good fit was developed. A vacuum (-78 kPa) was drawn on the expulsion port of a total surface-bearing suction socket to hold the liner tightly against the socket. Stump volume of 10 trans-tibial amputees was measured prior to and immediately after a 30 minute wa...

متن کامل

Using vacuum-assisted suspension to manage residual limb wounds in persons with transtibial amputation: a case series.

BACKGROUND Persons with amputation and residual limb wounds would benefit from the ability to continue wearing a prosthesis while healing. Sockets with vacuum-assisted suspension may reduce intra-socket motion and be less disruptive to wound healing. The purpose of this case series was to measure residual limb wound size over time in persons with transtibial amputation while using prostheses wi...

متن کامل

A new trim line concept for trans-tibial amputation prosthetic sockets.

Introduction Proximal trim lines for trans-tibial prosthetic sockets have traditionally been trimmed according to the mode of suspension to the limb. The supracondylar suspension, which retains the prosthetic socket to the limb by gripping above the femoral condyles, has a more proximal trim line compared to the more distal trim line used for a suspension with a patellar-tendon-bearing strap or...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2015