Dielectric and thermal properties of epoxy/boron nitride nanotube composites*

نویسندگان

  • Chunyi Y. Zhi
  • Yoshio Bando
  • Takeshi Terao
  • Chengchun Tang
  • Dmitri Golberg
چکیده

We report the fabrication of and investigations into the dielectric and thermal properties of epoxy/boron nitride nanotube (BNNT) composites. It was found that BNNT fillers can effectively adjust the dielectric constant of epoxy. Moreover, the thermal conductivity of epoxy was improved by up to 69 % with 5 wt % BNNTs. Our studies indicate that BNNTs are promising nanofillers for polymers, to obtain and control an adjustable dielectric property and improved thermal conductivity.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Experimental comparison of thermal neutron absorption cross section in nano and micro particles

The neutron collision cross-section is important in neutron use for a specific job, such as neutron therapy or even in nuclear reactors. In calculating computational codes such as MCNP, only information from the neutron-to-mass collision information contained in the computational code library is used, in the case of nanoscale particles in contrast to the mass of materials and / or particulate m...

متن کامل

The influence of interfaces and water uptake on the dielectric response of epoxy-cubic boron nitride composites

In this study, epoxy-cubic boron nitride composites are fabricated, and their dielectric response is investigated. They exhibit the same trend as epoxy composites reinforced with other filler types. Thus, at low filler concentrations, they exhibit a lower relative permittivity than neat epoxy. As the fill grade further increases, the relative permittivity of the composites increases as well. It...

متن کامل

Silver Nanoparticle-Deposited Boron Nitride Nanosheets as Fillers for Polymeric Composites with High Thermal Conductivity

Polymer composites with high thermal conductivity have recently attracted much attention, along with the rapid development of the electronic devices toward higher speed and performance. However, a common method to enhance polymer thermal conductivity through an addition of high thermally conductive fillers usually cannot provide an expected value, especially for composites requiring electrical ...

متن کامل

Flame retarding epoxy composites with poly(phosphazene-co-bisphenol A)-coated boron nitride to improve thermal conductivity and thermal stability

Based on the template-induced self-assembly characteristic of cyclomatrix polyphosphazene micro– nanometer materials, novel poly(cyclotriphosphazene-co-bisphenol A)-coated boron nitride (PCB-BN) was designed and synthesized by in situ condensation polymerization on the surfaces of boron nitride (BN) particles using the reaction of hexachlorocyclotriphosphazene (HCCP) with bisphenol A (BPA). It ...

متن کامل

Solvent-free fabrication of thermally conductive insulating epoxy composites with boron nitride nanoplatelets as fillers

A solvent-free method for the fabrication of thermally conductive epoxy-boron nitride (BN) nanoplatelet composite material is developed in this study. By this method, polymer composites with nearly any filler fractions can be easily fabricated. The maximum thermal conductivity reaches 5.24 W/mK, which is 1,600% improvement in comparison with that of pristine epoxy material. In addition, the as-...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2010