International Communications in Heat and Mass Transfer 35 ( 2008 ) 492 – 502 1 Entropy generation for natural convection by heated partitions in a cavity
نویسندگان
چکیده
Entropy generation for natural convection in a partitioned cavity, with adiabatic horizontal and isothermally cooled vertical walls, is studied numerically by both a FORTRAN code and the commercially available CFD-ACE software. Effects of the Rayleigh number, the position of the heated partition, and the dimensionless temperature difference on the local and average entropy generation rate are investigated. Proper scale analysis of the problem showed that, while fluid friction term has nearly no contribution to entropy production, the heat transfer irreversibility increases monotonically with the Nusselt number and the dimensionless temperature difference.
منابع مشابه
The optimization of inlet and outlet port locations of a vented square cavity
In this study, mixed convection heat transfer and local and global entropy generation in aventilated square cavity have been investigated numerically. The natural convection effect isachieved by a constant heat flux imposed at the bottom wall and cooled by injecting a coldfollow. In order to investigate the effect of port location, four different placementconfigurations of the inlet and outlet ...
متن کاملEntropy Generation of Double Diffusive Natural Convection in a Three Dimensional Differentially Heated Enclosure
Entropy generation of double diffusive natural convection in a three dimensional differentially heated enclosure has been performed numerically. Vertical walls of enclosure are heated differentially and remaining walls are adiabatic. The obtained results were presented via iso-concentration, iso-temperatures, velocity vector projection, particle trajectories, velocity profiles, iso-entropy, loc...
متن کاملCFD analysis of natural convection heat transfer in a square cavity with partitions utilizing Al2O3 nanofluid
In the present study, natural convective heat transfer in a partitioned square cavity utilizing nanofluids is studied. The vertical left and right walls are considered as the hot and cold walls, respectively and the partitions assumed to be adiabatic. The nanofluid used in this study is Al2O3 with the volume fraction of 20%. It is assumed that nanofluid is a single phase f...
متن کاملLattice Boltzmann method for MHD natural convection of CuO/water nanofluid in a wavy-walled cavity with sinusoidal temperature distribution
In this paper, natural convection heat transfer of CuO-water Nanofluid within a wavy-walled cavity and subjected to a uniform magnetic field is examined by adopting the lattice Boltzmann model. The left wavy wall is heated sinusoidal, while the right flat wall is maintained at the constant temperature of Tc. The top and the bottom horizontal walls are smooth and insulated against heat and mass....
متن کاملEffect of nanoparticle shape on natural convection heat transfer in a square cavity with partitions using water-SiO2 nanofluid
In this paper a numerical investigation is performed to study the effects of different nanofluids on convective heat transfer enhancement in a partitioned square cavity subject to different shapes of nanoparticle using water-SiO2 nanofluid. This study has been carried out to analyze the effects of SiO2 nanoparticle, its volumetric fraction between 2 and 4%, and nanoparticle shape (i.e. blades, ...
متن کامل