A Study of PLA Printability with Flexography
نویسنده
چکیده
Biodegradable films have been introduced in the packaging industry recently. Most products are boxes, bottles and bags. The printability of biodegradable film has not been fully investigated. This study tested the printability on clear and white Polylactic acid (PLA) films, and compared the print qualities to common packaging films like Polypropylene (PP), Polyethylene terephthalate (PET). Water-based flexo ink was used to test printability on PLA films. The influence of anilox roll and plate screen ruling was also considered. The print qualities were reported as dot shape, tone reproduction, and mottle. This study showed that biodegradable films could achieve similar quality compared to common packaging films. While printed at different screen rulings, clear PLA showed the highest dot gain and white PLA showed the lowest. All tested films appeared to have similar quality in keeping dot shape. In terms of mottle, white PLA appeared to be the worst among the four tested films.
منابع مشابه
Study of PLA Printability with Flexography Ink: Comparison with Common Packaging Polymer
Today, the economic consumption of biodegradable polymers is of capital importance in many applications. One of the most commonly used biopolymers is polylactic acid (PLA). The printability of the biodegradable film has not been fully investigated. This work tested the printability of polylactic acid (PLA) films and compared the print qualities to common packaging films like low density pol...
متن کاملDevelopment of MnO2 cathode inks for flexographically printed rechargeable zinc-based battery
A novel roll-to-roll flexographic printing process for rechargeable zinc-based battery manufacturing was presented in this paper. Based on the fundamental operating mechanism of flexography, key criteria for developing functional flexographic printing inks were established, including composite ink rheology (steady-state viscosity and yield stress), ink wettability as well as ink dispersing qual...
متن کاملPreparation of Reversible Thermochromic Ink for Flexography Printing on Paper and Study its Colorimetric Properties
Thermochromic printing inks could be security inks which respond to the color change when are being exposed to different temperatures. These inks with unusual chemical and physical specific characteristics are mostly produced for flexographic, screen and rotogravure printing systems under the supervision of skilled technical experts and with precise security controls. Since flexographic thermoc...
متن کاملVOC level control by ventilation improvement of Flexography printing room using CFD modeling
Using Computational Fluid Dynamics (CFD) technique, the dispersion contours and the exposure rate of Flexographic printing workers to VOCs in a printing department is evaluated. Firstly, VOCs distribution is determined in the printing room due to the existing ventilation system. Through next steps, 4 scenarios for lowering VOCs concentration and its exposure rate to workers are analyzed. Concen...
متن کاملEffect of different mass ratio of PLA: PEG segments in PLA-PEG-PLA copolymers on the physicochemical characterization and DNA release profile
Background: Adapting controlled release technologies to the delivery of DNA has the great potential to overcome extracellular barriers that limit gene delivery. This study investigates the effect of different mass ratio of PLA: PEG in the various tri block poly (lactic acid)-poly (ethylene glycol) - Poly (lactic acid) copolymer (PLA-PEG-PLA) on the properties of the resulting nanoparticles. Me...
متن کامل