Analysis of Acoustic Emission on White-Coated Paperboard During a Wedge Cutting Process

نویسندگان

  • Yasushi Fukuzawa
  • Shigeru Nagasawa
چکیده

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Cluster Analysis of Acoustic Emission Signals for Carbon/Epoxy Composite in Four-point Bending Test (RESEARCH NOTE)

Due to the extensive use of composites in various industries and the fact that defects reduce ultimate strength and efficiency during operation, detection of failures in composite parts is very important. The aim of this paper is to use Acoustic Emission (AE) non-destructive method in four-point bending test of carbon/epoxy composite to analyze and examine the failure mechanisms. This method is...

متن کامل

Characteristics of Acoustic Emission Signals in Machining Using Diamond Coated Tools

Diamond coated cutting tools have been pursued as a costeffective substitute to brazed polycrystalline diamond (PCD) tools in applications such as machining high-strength and lightweight materials. However, coating delamination has been known as the major failure mode of diamond coated tools, which terminates tool life prematurely. Once delamination failure occurs, the tool substrate often subj...

متن کامل

Experimental Study & Modeling of Surface Roughness in Turning of Hardened AISI 4340 Steel Using Coated Carbide Inserted

Turning of hardened steels using a single point cutting tool has replaced the cylindrical grinding now as it offers attractive benefits in terms of lower equipment costs, shorter set up time, fewer process setups, higher material removal rate, better surface quality and elimination of cutting fluids compared to cylindrical grinding. In order to obtain desired surface quality by machining, pr...

متن کامل

AE signals as laser cutting quality indicators

The paper presents results of an analysis of acoustic emission (AE) signals obtained during laser cutting of a steel plate, which is frequently used in the production of automotive body components. The acoustic emission in the plate, which is produced by various physical phenomena occurring during the laser cutting process, was measured with contact PZT sensors. During the laser cutting process...

متن کامل

Surface Roughness, Machining Force and FlankWear in Turning of Hardened AISI 4340 Steel with Coated Carbide Insert: Cutting Parameters Effects

The current experimental study is to investigate the effects of process parameters (cutting speed, feed rate and depth of cut) on performance characteristics (surface roughness, machining force and flank wear) in hard turning of AISI 4340 steel with multilayer CVD (TiN/TiCN/Al2O3) coated carbide insert. Combined effects of cutting parameter (v, f, d) on performance outputs (Ra, Fm and VB) ar...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2017