New technique for the interpretation of ISO 14649 and 6983 based on open CNC technology
نویسندگان
چکیده
Computer numerical control (CNC) controller is the termination organiser, which is located at the end of the manufacturing process chain. The CNC controller is composed of two modules: software and hardware. The software module of the lontroller is known as interpreter that translates Intemational Standards Organization (lSO) data interface model instructions to the hardware parts of the controller in the required structure of the machine. The aim of next-generation CNC is to be portable, interoplrable, flexible, open, intelligent and adoptable. In the progression towards the development of next-
منابع مشابه
STEP-compliant CNC system for turning: Data model, architecture, and implementation
STEP-NC, a new data model for CAD–CAM–CNC chain, is expected to encompass the whole scope of e-manufacturing. The new data model formalized as ISO 14649 is under development by ISO TC184 SC1 and SC4 for the replacement of the old standard so-called G&M codes, formalized as ISO 6983 which has been used since the 1950s. As the new data model is being established, development and implementation of...
متن کاملA Review of Intelligent Cnc Controller Development Based on Step-nc
In the contemporary Computer Numeric Controlled (CNC) machine tools of Computer Aided Manufacturing (CAM) and CNC process conducted by a number of inter-related operations and parameters using G Codes and M codes set as RS274 or ISO 6983 standard. However, this programming language does not explicitly relate to each other to have control of arbitrary locations other than the motion of the block...
متن کاملStriving for a total integration of CAD, CAPP, CAM and CNC
Over the last 50 years, conventional programming of the numerical controlled (NC) machine tools has been based on a data model stipulated by ISO 6983, or otherwise known as G-codes. It was designed to sequentially pass instructions to the controls of machine tools with little, if any, intelligence. It has been realized that this standard has led to serious impediments for the fulfilment of tota...
متن کاملCAD/CAM solutions for STEP-compliant CNC manufacture
The ability to generate an NC tool path is now common place in CAD/CAM systems, but the technology used for programming and control of NC machines is still based on 1950’s standards. Today under the IMS project called STEP-NC in Europe and Asia, and Super Model in USA, industrialists and academics are collaborating to deliver a new data model as an ISO 14649 standard for CNC machines. This stan...
متن کاملIntegrating the CAx process chain for STEP-compliant NC manufacturing of asymmetric parts
Acceleration of product development, decrease of NC programming effort and increase of product quality are demands from enterprises to make their products competitive. These requirements are hardly met by the today’s used CAx process chain which is based on a multitude of interfaces and the standardized control data format ISO 6983. New concepts of product data modelling are necessary for a str...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Int. J. Computer Integrated Manufacturing
دوره 29 شماره
صفحات -
تاریخ انتشار 2016