Status of the CH-DTL for the FAIR Proton Injector

نویسندگان

  • G. Clemente
  • H. Podlech
چکیده

A first 352 Mhz CH-cavity is under construction, which will demonstrate main production steps like stem welding and galvanic copper palting of the completed stainless steel tank module

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

KONUS BEAM DYNAMICS DESIGN OF A 70 mA , 70 MeV PROTON CH - DTL FOR GSI - SIS 12 *

Abstract The future scientific program at GSI needs a dedicated proton injector into the synchrotron SIS, in order to increase the proton intensity of the existing UNILAC/SIS12 combination by a factor of 70, resulting in 7x1012 protons in the synchrotron. A compact and efficient 352 MHz RFQ CH-DTL combination based on novel structure developments for RFQ and DTL was worked out. For DTL's operat...

متن کامل

High Current Proton Beam Operation at Gsi Unilac

A significant part of the experimental program at FAIR is dedicated to pbar physics requiring a high number of cooled pbars per hour [1]. The primary proton beam has to be provided by a 70 MeV proton linac followed by two synchrotrons. The new FAIR proton linac [2] will deliver a pulsed proton beam of up to 35 mA of 36 μs duration at a repetition rate of 4 Hz. The recent GSI heavy ion linac (UN...

متن کامل

Geometrical optimisation of the 70 mA, 70 MeV CH-Proton Injector Cavity for the FAIR Project

The FAIR project needs a new injector for the SIS-12, namely a 352 MHz CH proton linac with an output energy of 70 MeV and a beam current of 70 mA[1]. The single cell geometry has been investigated extensively in order to improve the electrical and mechanical properties at the low energy side. A cell geometry with a length of 40 mm (equivalent to β=0.09) was chosen and studied with the program ...

متن کامل

تطبیق پذیری باریکه -H در قسمت انرژی پایین و متوسط ماشین Linac4 در سرن

Linac4 is the near future 160 MeV H- linear accelerator of the CERN presently under construction. It will replace the present Linac2 as injector of the proton accelerator complex in CERN. The Linac4 is composed of a 45 keV ion source, a Low Energy Beam Transport (LEBT), a 352.2 MHz Radio Frequency Quadrupole (RFQ), which accelerates the beam to 3 MeV, and a Medium Energy Beam Transport (MEBT), ...

متن کامل

Design and Construction of the Pefp Timing System for a 20mev Proton Beam*

The timing system of the proton accelerator of the PEFP requires synchronization between the accelerator and the multipurpose beam lines. The system is based on an event distribution system that broadcasts the timing information globally to all the equipment. Fast I/O hardware of the timing system is to distribute appropriate timing signals to accelerator systems, including the Injector, RFQ, D...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2006