Journal of Solid Mechanics Vol
نویسندگان
چکیده
The dynamic stability of a composite plate with external electrorheological (ER) damper subjected to an axial periodic load is investigated. Electrorheological fluids are a class of smart materials, which exhibit reversible changes in mechanical properties when subjected to an electric field. As a result, the dynamic behavior of the structure is changed. The ER damper is used for suppressing the vibrations and improving the stability of the system. The Bingham plastic model is employed to express the behavior of the ER fluid. The finite element model of the structure is developed and constant acceleration average method is used to obtain the response of the system. Effect of different parameters such as the electric field, the orientation of the ER damper, the initial gap between the two electrodes of the ER damper and the stacking sequences of the plate on the first instability boundaries of the composite plate are investigated. © 2016 IAU, Arak Branch.All rights reserved.
منابع مشابه
A Study of Na/K Feldspar Solid Solution Using Statistical Mechanics
Thermal behavior of various solid feldspars are different, namely those of bivalent cations show no change in the distribution of Al and Si atoms, whereas feldspars of univalent cations become more disordered with raising temperature. In the latter case Al atoms migrate from the sites they occupe at low temperatures and interchange positions with the Si atoms. At high temperatures (but stil...
متن کاملAnalysis of the Casing Collapse in Terms of Geomechanical Parameters and Solid Mechanics
Casing collapse is one of the major problems in oil fields, imposing a lot of costs on oil companies. This problem occurs not only at drilling times in some formations but also after the completion and production can lead to many problems. Analysis of the behavior of casing collapse in terms of geo-mechanics and solid mechanics could significantly meet the needs of the oil industry of Iran. In ...
متن کاملFinite Element Simulation of Contact Mechanics of Cancer Cells in Manipulation Based on Atomic Force Microscopy
The theory of contact mechanics deals with stresses and deformations which arise when the surfaces of two solid bodies are brought into contact. In elastic deformation contact occurs over a finite area. A regular method for determining the dimensions of this area is Hertz Contact Model. Appearance of atomic force microscope results in introduction of Contact ...
متن کاملAnalysis of Viscoelastic Functionally Graded Sandwich Plates with CNT Reinforced Composite Face Sheets on Viscoelastic Foundation
In this article, bending, buckling, and free vibration of viscoelastic sandwich plate with carbon nanotubes reinforced composite facesheets and an isotropic homogeneous core on viscoelastic foundation are presented using a new first order shear deformation theory. According to this theory, the number of unknown’s parameters and governing equations are reduced and also the using of shear correct...
متن کاملLongitudinal-Torsional and Two Plane Transverse Vibrations of a Composite Timoshenko Rotor
In this paper, two kinds of vibrations are considered for a composite Timoshenko rotor: longitudinal-torsional vibration and two plane transverse one. The kinetic and potential energies and virtual work due to the gyroscopic effects are calculated and the set of six governing equations and boundary conditions are derived using Hamilton principle. Differential quadrature method (DQM) is used as ...
متن کاملVibration Analysis of Multi-Step Bernoulli-Euler and Timoshenko Beams Carrying Concentrated Masses
In this paper, vibration analysis of multiple-stepped Bernoulli-Euler and Timoshenko beams carrying point masses is presented analytically for various boundary conditions. Each attached element is considered to have both translational and rotational inertias. The method of solution is “transfer matrix method” which is based on the changes in the vibration modes at the vicinity of any discontinu...
متن کامل