Contents 2 From Strength to Strength
نویسندگان
چکیده
s: Articles should not include an abstract. Please note that we will consider articles outside of the theme.The Residents’ Journal accepts manuscripts authored by medical students, resident physicians, and fellows; manuscripts authored by members of faculty cannot be accepted. To submit a manuscript, please visit http://mc.manuscriptcentral.com/appi-ajp, and select “Residents” in the manuscript type field. Upcoming Issue Themes
منابع مشابه
THE EFFECT OF TI CONTENTS ON THE AMOUNTS OF INCLUSIONS FORMATION AND MECHANICAL PROPERTIES OF C300 HIGH STRENGTH STEEL
In this research the influence of Ti contents on the amounts of inclusions formation and mechanical properties of a high alloy high strength steel, C300, has been investigated. For this purpose several bars were casted under the same solidification conditions, but different amounts of Ti element. All the seven casted bars were homogenized at 1200°C for a period of 2 hours. Then, they were immed...
متن کاملStrength-Flow Parameters of Loose Silty Sands From Piezocone Tests
Piezocone penetration tests with dissipation phases are particularly useful for geotechnical site characterization. They also provide three independent readings with depth from a single sounding as well as time-rate information. In past investigations, only silty sands with specific silt content have been tested and complete sets of tests have not been conducted to evaluate the influence of dif...
متن کاملPalm kernel fruit fiber reinforced gypsum-cement based wall panels: It’s physical and mechanical characteristics
Agricultural waste fibers have been found to be suitable as reinforcement in cement-based composites, but studies on oil palm fiber as reinforcement in gypsum-cement wall panels are scarce. A mixture of two equal weights of gypsum and cement, with water-binder ratios of 0.45 and 0.55 were prepared. In each mix a varying percentage of fiber contents of 2%, 3% and 4% by weight of the binders were...
متن کاملPalm kernel fruit fiber reinforced gypsum-cement based wall panels: It’s physical and mechanical characteristics
Agricultural waste fibers have been found to be suitable as reinforcement in cement-based composites, but studies on oil palm fiber as reinforcement in gypsum-cement wall panels are scarce. A mixture of two equal weights of gypsum and cement, with water-binder ratios of 0.45 and 0.55 were prepared. In each mix a varying percentage of fiber contents of 2%, 3% and 4% by weight of the binders were...
متن کاملINVESTIGATING THE LINEAR EXPANSION, SET, AND STRENGTH BEHAVIORS OF THE BINARY MIXTURE PORTLAND CEMENT CLINKER-GYPSUM
Abstract: The linear expansion, early-age compressive strength and setting times of the binary mixtures of gypsum and Portland cement clinkers of relatively low C3A-contents were investigated. For this reason, type 1, 2, and 5 of Portland cement-clinkers were selected and a number of binary mixtures were designed. At relatively lower percentages of gypsum (about 5%), the early strength behavior...
متن کاملاثر مواد آلی خاک، هدایت الکتریکی و نسبت جذب سدیم بر مقاومت کششی خاک دانه ها
The general characteristics of salt-affected soils and soil structure degradation process are partially known, but the effects of saline and sodic conditions on mechanical properties of soils are not well recognized. In this study, the effects of electrical conductivity (EC) and sodium adsorption ratio (SAR) on tensile strength of soils with different organic carbon contents were assessed under...
متن کامل