Study on the Control of End Quality by One Closed Cross Wedge Rolling Based Wedge Block
نویسنده
چکیده
X. D. Shu, J. Wei, C. Liu: College of Mechanical Engineering and Mechanics, Ningbo University, China The paper presents a new method of one closed cross wedge rolling (CWR) based wedge block to achieve near net forming of CWR shafts. The modeling is performed by using the Finite Element Method (FEM) software DEFORM-3D. The metal flow rule of the shaft is clarified by analyzing the strain and displacement field of the shaft. The results demonstrate that the concave heart value of rolled part end will be reduced by about 70 % by one closed CWR based wedge block, comparing it with the case without wedge block. And also the rolling experiments are performed the result of which provides reliable theoretical basis for achieving near net forming of CWR.
منابع مشابه
The Clinical Outcome of Simultaneous Lateral Closed- Wedge Distal Femoral Osteotomy and Anterior Cruciate Ligament Reconstruction in the ACL-deficient Knees with Symptomatic Femoral Varus Deformity
Background: Nowadays combined high tibial osteotomy and ACL reconstruction is accepted as a safe and effectivesurgery for patients with symptomatic varus osteoarthritis and anterior knee instability; however, the source of varusdeformity is sometimes the femoral bone. No studies have reported concomitant ACL reconstruction and distal femoralosteotomy in ACL-deficient knees wit...
متن کاملAssessment of Neutron Contamination Originating from the Presence of Wedge and Block in Photon Beam Radiotherapy
Background: One of the main causes of induction of secondary cancer in radiation therapy is neutron contamination received by patients during treatment.Objective: In the present study the impact of wedge and block on neutron contamination production is investigated. The evaluations are conducted for a 15 MV Siemens Primus linear accelerator. Methods: Simulations were performed using MCNPX Monte...
متن کاملSTRESS INTENSITY FACTORS FOR AN INTERIOR GRIFFITH CRACK OPENED BY HEATED WEDGE IN A STRIP WHOSE EDGES ARE NORMAL TO CRACK AXIS
After second world war, we have seen a very rapid development of Thermoelasticity stimulated by various engineering sciences. As we know, structures behave in different fashion under climate variation and the most responsible factor for these variations is heat which falls through and causes deformation of the body. A considerable progress in the field of aircraft and machine structures, mainly...
متن کاملNew Stilling Basins Designs for Deep Rectangular Outlets
The experimental study reported here is intended to evolve new designs of stilling basins for deep and narrow openings used as outlets. Several appurtenances such as grid, Impact wall, stepped wall, weir wall, sloping end sill and wedge shaped blocks are used to study their influence on the hydraulic performance of the stilling basins with an aim to propose efficient stilling basin models. All ...
متن کاملRoof Tunnel Stability by Wedge Analysis
A jointed rock mass presents a more complex design problem than the other rock masses. The complexity arises from the number (greater than two) of joint sets which define the degree of discontinuity of medium. The condition that arises in these types of rock masses is the generation of discrete rock blocks, of various geometries. They defined by the natural fracture surfaces and the excavation...
متن کامل