A Review of Acoustic Fdtd Simulation Technique and Its Application to Underground Cavity Detection
نویسندگان
چکیده
The feasibility of the Finite Difference Time Domain (FDTD) technique for acoustic wave created an opportunity for underground cavity detection that poses strong potential for acoustic wave spectrum application. The numerous significant advances have been attained to date, and more technological challenge awaits the optimization of an acoustic system to fill the gap between expectations and practical performance. Despite this tremendous progress, challenging issues related to the FDTD technique for acoustic wave simulation within the underground cavity detection yet to conclude. This review presents the development of the numerical approach in the acoustic wave simulation to excite pulse from the source, with particular emphasis being placed on the recent progress, a portion of travelling waves interact with the underground cavity structure and the cavity properties measurement of the cavity through different approaches. .
منابع مشابه
مقایسه نتایج شبیهسازی بلور فوتونی با استفاده از روش FDTD دوبعدی بهبودیافته و FDTD سهبعدی
The accuracy of improved two dimensional finite difference time domain method (2D FDTD) is verified by comparing with 3D FDTD method and experimental data. The optimized 60° photonic crystal waveguide bend, used in this study as a test case, is composed of InPGaAs/InP material and air holes and TE polarization is considered. The photonic crystal waveguide bend transmission data was measured...
متن کاملMulti-Region Finite Difference Time Domain Simulation for Airborne Radar
Traditional finite difference time domain (FDTD) is classic numerical method for solving wave propagation problems such as electromagnetic wave, seismic wave and acoustic wave. As for airborne GPR simulation, modeling space is so large that memory consuming is pretty huge; on the other hand, the area between source antenna and ground surface is homogenous medium – air, where analytic solution c...
متن کاملشبیهسازی عددی پوشش های ضد اکو حفره دار با استفاده از ترکیب روشهای اجزاء محدود و کانال آکوستیکی
The absorption performance of anechoic coatings depends on the material properties, layer thicknesses and cavity distribution density and cavity size. In this paper a design method based on numerical simulation was presented by combining FEM and acoustic duct method (ADM). Analyzing of anechoic coatings was performed under active sonar impinging plane wave by normal incident angle. In thi...
متن کاملDesign and simulation of a highly sensitive photonic crystal temperature sensor based on a cavity filled with the distilled water
In this paper design and two dimensional (2D) simulation of a photonic crystal highly sensitive temperature sensor is presented. The 2D simulations are based on finite-difference time-domain (FDTD) method and are done using Rsoft software. The device is constructed using a cavity filled with the distilled water located in the center of the photonic crystal waveguide. The operation of the propos...
متن کاملAcoustic detection of buried objects in 3-D fluid saturated porous media: numerical modeling
Acoustic waves can be a viable tool for the detection and identification of land mines, unexplored ordnance (UXO), and other buried objects. Design of acoustic instruments and interpretation and processing of acoustic measurements call for accurate numerical models to simulate acoustic wave propagation in a heterogeneous soil with buried objects. Compared with the traditional seismic exploratio...
متن کامل