Influence of Thermally Induced Chemorheological Changes on the Inflation of Spherical Elastomeric Membranes

When an elastomeric material is deformed and subjected to temperatures above some chemorheological value Tcr (near 100-C for natural rubber), its macromolecular structure undergoes time and temperature dependent chemical changes. The process continues until the temperature decreases below Tcr. Compared to the virgin material, the new material system has modified properties (often a reduced stiffness) and permanent set on removal of the applied load. A recently proposed constitutive theory is used to study the influence of chemorheological changes on the inflation of an initially isotropic spherical rubber membrane. The membrane is inflated while at a temperature below Tcr. We then look at the pressure response assuming the sphere’s radius is held fixed while the temperature is increased above Tcr for a period of time and then returned to its original value. The inflation pressure during this process is expressed in terms of the temperature, representing entropic stiffening of the elastomer, and a time dependent property that represents the kinetics of the chemorheological change in the elastomer. When the membrane has been returned to its original temperature, it is shown to have a permanent set and a modified pressure-inflated radius relation. Their dependence on the initial inflated radius, material properties and kinetics of chemorheological change is studied when the underlying elastomeric networks are neo-Hookean or Mooney–Rivlin. Mathematics Subject Classifications (2000): 74F05, 74F25, 74D10, 74E94.