The pair chart
نویسنده
چکیده
منابع مشابه
Design and Fabrication Process of MTF Phantom CT Scan
Introduction: One of the main steps in the optimization process in diagnostic imaging is the quality control of radiology devices. The usual method of CT scan calibration is used of a phantom. The phantom created a certain weakening for the radiation through which it passes. One of the most suitable methods for quantitative analysis of the resolution and contrast in CT scan im...
متن کاملPeykan check, a simple continuous quality control method for hematology analyzers
A simple inexpensive con!nuous quality control method, by means of eight basic blood coun!ng parameters, obtained from automated hematology analyzers, using pa!ent samples, is described. A few samples with low, normal and high values were selected and introduced to the instrument early in the morning as the first count, the results of which are plo#ed on the appropriate chart as dots. The sa...
متن کاملA generalized Conforming Run Length control chart for monitoring the mean of a variable
The attribute Conforming Run Length (CRL) control chart has attracted increasing research interests in Statistical Process Control (SPC). It decides the process status based on the interval or distance between two nonconforming units. This article proposes a Generalized CRL chart (namely GCRL chart) for monitoring the mean of a measurable quality characteristic x under 100% inspection. To run a...
متن کاملPerformance of CCC-r control chart with variable sampling intervals
The CCC-r chart is developed based on cumulative count of a conforming (CCC) control chart that considers the cumulative number of items inspected until observing r nonconforming ones. Typically, the samples obtained from the process are analyzed through 100% inspection to exploit the CCC-r chart. However, considering the inspection cost and time would limit its implementation. In this paper, w...
متن کاملEffects of inspection errors on economically design of CCC-r control chart
CCC-r chart extended approach of CCC charts, is a technique applied when nonconforming items are rarely observed. However, it is usually assumed that the inspection process is perfect in the implementation control charts imperfect inspections may have a significant impact on the performance of the control chart and setting the control limits. This paper first investigates the ...
متن کامل