Low temperature chemically synthesized rutile TiO2 photoanodes with high electron lifetime for organic dye-sensitized solar cells.
نویسندگان
چکیده
Electron lifetime in mesoporous nanostructured rutile TiO2 photoanodes, synthesized via a simple, cost-effective, low temperature (50-55 °C) wet chemical process, annealed at 350 °C for 1 h and not employing any sprayed TiO2 compact layer, was successfully tailored with 0.2 mM TiCl4 surface treatment that resulted in light to electric power conversion efficiency up to 4.4%.
منابع مشابه
The investigation on different light harvesting layers and their sufficient effect on the photovoltaic characteristics in dye sensitized solar cell
Titanium dioxide-based nanofibers (TiO2 nanofiber) were prepared by an electrospinning technique. The electrospun composite fibers were synthesized at different concentrations of titanium isopropoxide (25.35, 50.69, 76.05 wt%) and calcinated at different temperatures (450 oC, 650 oC and 850 oC) for 2 h. The diameters of nanofibers decreased by increas...
متن کاملA Performance Comparison of Dye-Sensitized Solar Cells Based on Mesoporous and Nanostructured Photoanodes
A comparison has been drawn in pure anatase and rutile forms of TiO2 films with their respective nano crystalline forms as photoanodes in dye-sensitized solar cells. All the films have been synthesized by using sol-gel method. Crystalline nature of the films has been investigated by x-ray diffraction (XRD) and morphologies have been studied by scanning electron microscopy (SEM). The short-circu...
متن کاملFabrication of dye sensitized solar cells with a double layer photoanode
Dye sensitized solar cell was fabricated from a double layer photoanode. First, TiO2 nanoparticles were synthesized by hydrothermal method. These TiO2 NPs were deposited on FTO glasses by electrophoretic deposition method in applied voltage of 5 V and EPD time of 2.5-10 min. Then TiO2 hollow spheres (HSs) were synthesized by sacrificed template method with Carbon Spheres as template and TTIP ...
متن کاملHierarchically structured microspheres for high-efficiency rutile TiO(2)-based dye-sensitized solar cells.
Peachlike rutile TiO2 microsphere films were successfully produced on transparent conducting fluorine-doped tin oxide substrate via a facile, one-pot chemical bath route at low temperature (T = 80-85 °C) by introducing polyethylene glycol (PEG) as steric dispersant. The formation of TiO2 microspheres composed of nanoneedles was attributed to the acidic medium for the growth of 1D needle-shaped ...
متن کاملHigh Efficient Transparent TiO2 Nanotube Dye-Sensitized Solar Cells: Adhesion of TiO2 Nanotube Membrane to FTO by Two Different Methods
In order to fabricate transparent TiO2 nanotube dye-sensitized solar cells, anodically growth nanotube membranes are detached from Ti substrate by a re-anodization method. The membranes are transferred on FTO glass by two different methods. At the first one, 100mM Ti-isopropoxide is used to make TiO2 nanoparticles for adhering TiO2 nanotube membranes to FTO and ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Chemical communications
دوره 49 28 شماره
صفحات -
تاریخ انتشار 2013