Asymptotic Effectiveness of a Catalyst Particle in the Form of a Hollow Cylinder
نویسندگان
چکیده
An explicit formula is presented for the effectiveness factor of a catalyst particle in the form of a hollow cylinder taking into account the reactant diffusion in the fluid phase of the cylindrical core and diffusion and reaction in the outer reactive annulus. The proper normalization to be used in the definition of the generalized Thiele modulus as well as the aspect ratios that lead to the highest effectiveness are also determined. VC 2013 American Institute of Chemical Engineers AIChE J, 59: 4020–4024, 2013
منابع مشابه
Torsion in Microstructure Hollow Thick-Walled Circular Cylinder Made up of Orthotropic Material
In this paper, a numerical solution has been developed for hollow circular cylinders made up of orthotropic material which is subjected to twist using micro polar theory. The effect of twisting moment and material internal length on hollow thick-walled circular cylinder made up of micro polar orthotropic material is investigated. Finite difference method has been used to exhibit the influence o...
متن کاملMechanical and Thermal Stresses In a Linear Plastic FGM Hollow Cylinder Due to Axisymmetric Loads
In this paper, an analytical solution for computing the linear plastic stresses and critical temperature and pressure in a FGM hollow cylinder under the internal pressure and temperature is developed. It has been assumed that the modulus of elasticity and thermal coefficient of expansion were varying through thickness of the FGM material according to a power law relationship. The Poisson's rati...
متن کاملMechanical and Thermal Stresses in a FGPM Hollow Cylinder Due to Non-Axisymmetric Loads
In this paper, the general solution of steady-state two-dimensional non-axisymmetric mechanical and thermal stresses and mechanical displacements of a hollow thick cylinder made of fluid-saturated functionally graded porous material (FGPM) is presented. The general form of thermal and mechanical boundary conditions is considered on the inside and outside surfaces. A direct method is used to sol...
متن کاملHollow Piezoelectric Cylinder under Transient Loads
In this paper, transient solution of two dimensional asymmetric thermal and mechanical stresses for a hollow cylinder made of piezoelectric material is developed. Transient temperature distribution, as function of radial and circumferential directions and time with general thermal boundary-conditions, is analytically obtained, using the method of separation of variables and<br...
متن کاملMechanical Stresses in a Linear Plastic FGM Hollow Cylinder Due to Non-Axisymmetric Loads
In this paper, an analytical solution for computing the linear plastic stresses and critical pressure in a FGM hollow cylinder under the internal pressure due to non-Axisymmetric Loads is developed. It has been assumed that the modulus of elasticity was varying through thickness of the FGM material according to a power law relationship. The Poisson's ratio was considered constant throughout the...
متن کامل