Draw‐Spinning of Kilometer‐Long and Highly Stretchable Polymer Submicrometer Fibers
نویسندگان
چکیده
A new method is developed to directly spinning perfectly uniaxial fibers in an ultrafast manner. Besides, this method can tune the fibers' diameter through adjusting processing parameters such as the feeding rate of precursors. Uniaxial nylon 66 fibers prepared via this method show superior mechanical properties due to the alignment in each level of the structure.
منابع مشابه
Fabrication of Continuous Microfibers Containing Magnetic Nanoparticles by a Facile Magneto-Mechanical Drawing
A facile method termed magneto-mechanical drawing is used to produce polymer composite microfibers. Compared with electrospinning and other fiber spinning methods, magneto-mechanical drawing uses magnetic force generated by a permanent magnet to draw droplets of polymer/magnetic nanoparticle suspensions, leading to fabrication of composite microfibers. In addition, because of the rotating colle...
متن کاملStudy on the Damaging of Dyed Cotton Fibers with Direct Dye in Spinning Processes and its Effect on the Properties of Cotton Mélange Yarn
The influence of dyeing and spinning on the characteristics of cotton fibers and its impact on the properties of cotton mélange yarn has been investigated. Grey cotton fibers with mean fiber length and fineness of 29 mm and 4.2 micronair were pre-treated and dyed. Three ring yarns were spun from 100 % grey cotton (R.R.Y), 50-50 % blend of dyed and grey cotton (M.R.Y) and 100 % dyed cotton fiber...
متن کاملMultimaterial preform coextrusion for robust chalcogenide optical fibers and tapers.
The development of robust infrared fibers is crucial for harnessing the capabilities of new mid-infrared lasers. We present a novel approach to the fabrication of chalcogenide glass fiber preforms: one-step multimaterial extrusion. The preform consists of a glass core and cladding surrounded by a built-in, thermally compatible, polymer jacket for mechanical support. Using this approach we extru...
متن کاملFabrication of Biodegradable PCL Particles as well as PA66 Nanofibers via Air-Sealed Centrifuge Electrospinning (ASCES)
This study presents a method for fabrication of ultrafine polymeric nanofibers as well as nano/micro particles utilizing centrifugal and electrostatic forces simultaneously. To reduce the diameter and variety of nanofibers produced from solid state polymerized PA66, a unique electrocentrifuge spinning device was utilized with a rotating nozzle and collector, while the fabrication process (spinn...
متن کاملLarge-scale and highly efficient synthesis of micro- and nano-fibers with controlled fiber morphology by centrifugal jet spinning for tissue regeneration.
PLLA fibrous tissue scaffolds with controlled fiber nanoscale surface roughness are fabricated with a novel centrifugal jet spinning process. The centrifugal jet spinning technique is a highly efficient synthesis method for micron- to nano-sized fibers with a production rate up to 0.5 g min(-1). During the centrifugal jet spinning process, a polymer solution jet is stretched by the centrifugal ...
متن کامل