Comparative Design of 16-Bit Sparse-Tree Rsfq Adder

نویسندگان

  • S. Saddam Hussain
  • S. Mahaboob Basha
چکیده

In this paper, we propse 16-bit sparse tree RSFQ adder (Rapid single flux quantam), kogge-stone adder, carry lookahead adder. In general N-bit adders like Ripple carry adder s(slow adders compare to other adders), and carry lookahead adders(area consuming adders) are used in earlier days. But now the most of industries are using parallel prefix adders because of their advantages compare to kogge-stone adder, carry lookahead adder, Our prefix sparse tree adders are faster and area efficient. Parallel prefix adder is a technique for increasing the speed in DSP processor while performing addition. We simulate and synthesis different types of 16-bit sparse tree RSFQ adders using Xilinx ISE10.1i tool, By using these synthesis results, We noted the performance parameters like number of LUT’s and delay. We compare these three adders interms of LUT’s represents area) and delay values. Keywords—digital arithmetic, RSFQ adder, kogge-stone adder ,carry operator, prefix adder.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Design and Simulation of a 2GHz, 64×64 bit Arithmetic Logic Unit in 130nm CMOS Technology

The purpose of this paper is to design a 64×64 bit low power, low delay and high speed Arithmetic Logic Unit (ALU). Arithmetic Logic Unit performs arithmetic operation like addition, multiplication. Adders play important role in ALU. For designing adder, the combination of carry lookahead adder and carry select adder, also add-one circuit have been used to achieve high speed and low area. In mu...

متن کامل

A High-Speed Dual-Bit Parallel Adder based on Carbon Nanotube ‎FET technology for use in arithmetic units

In this paper, a Dual-Bit Parallel Adder (DBPA) based on minority function using Carbon-Nanotube Field-Effect Transistor (CNFET) is proposed. The possibility of having several threshold voltage (Vt) levels by CNFETs leading to wide use of them in designing of digital circuits. The main goal of designing proposed DBPA is to reduce critical path delay in adder circuits. The proposed design positi...

متن کامل

Design of Resource Efficient FIR Filter Structure Using Adders and Multiplier

This paper presents high speed digital Finite Impulse Response (FIR) filter relying on Wallace tree multiplier and Carry Select Adder (CSLA). Adder has three architectures such as basic CSLA using RCA (Ripple Carry Adder), CSLA using BEC (Binary to Excess-1 Converter) and CSLA using D-latch. In this paper we propose 4tap FIR Filter architecture using 16-bit CSLA using D-latch and 8-bit Wallace ...

متن کامل

Energy–Delay Optimization of 64-Bit Carry-Lookahead Adders With a 240 ps 90 nm CMOS Design Example

A methodology for energy–delay optimization of digital circuits is presented. This methodology is applied to minimizing the delay of representative carry-lookahead adders under energy constraints. Impact of various design choices, including the carrylookahead tree structure and logic style, are analyzed in the energy–delay space and verified through optimization. The result of the optimization ...

متن کامل

Analysis of Supply Voltage Based on 16 Bit Adders

Continuous scaling of the transistor size and reduction of the operating voltage has led to a significant performance improvement of integrated circuits. Low power consumption and smaller area are some of the most important criteria for the fabrication of DSP systems and high performance systems. In this paper there is try to determine the best solution to this problem by comparing a few adders...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2014