Preparation and Characterization of Biodegradable Polylactide/ethylene Methyl Acrylate Copolymer Blends
نویسندگان
چکیده
The poly(lactic acid)/ethylene methyl acrylate copolymer (PLA/EMA) blends were melt blended with by a twin-screw extruder. The phase morphologies, mechanical, and rheological properties of the PLA/EMA blends with three weight ratios were investigated. The results showed that the addition of EMA improves the toughness of PLA at the expense of the tensile strength to a certain degree. All the PLA/EMA blends display typical droplet-matrix morphology, and different characteristic linear viscoelastic properties in the low frequency region, which were investigated in terms of their complex viscosity, storage modulus, and Cole-Cole plots. The interfacial tension between the PLA and EMA is calculated using the Palierne model conducted on the 80/20 PLA/EMA blend, and the calculated result is 3.3 mN/m.
منابع مشابه
Synthesis of ethylene maleic anhydride copolymer containing fungicides and evaluation of their effect for wood decay resistance
The aim of the present study was to combat wood decay based on the approach controlled-release biocides from polymers. The possibility of introducing polymer-bonded fungicides into the cell lumens was investigated. The synthesis of ethylene maleic anhydride copolymer con taining pentachlorophenol (penta) and 8-hydroxy quino line (8HQ) in N, N dimethyl formamide is described. It was demonstrat...
متن کاملSynthesis and characterization of electroactive and biodegradable ABA block copolymer of polylactide and aniline pentamer.
A triblock copolymer PLA-b-AP-b-PLA (PAP) of polylactide (PLA) and aniline pentamer (AP) with the unique properties of being both electroactive and biodegradable is synthesized by coupling an electroactive carboxyl-capped AP with two biodegradable bi-hydroxyl-capped PLAs via a condensation reaction. Three different molecule weight PAP copolymers are prepared. The PAP copolymers exhibit excellen...
متن کاملPreparation, characterization and in vitro release properties of ibuprofen-loaded microspheres based on polylactide, poly(epsilon-caprolactone) and their copolymers.
In this paper, ibuprofen was encapsulated into microspheres by oil-in-water (o/w) emulsion solvent evaporation method. Biodegradable polymers with certain compositions and characteristics such as polylactide (PLA), poly(epsilon-caprolactone) (PCL) and their block copolymer were used to prepare the microspheres. The results indicate that, under the same processing conditions, the drug entrapment...
متن کاملCompatibilization of polycarbonate/poly (ethylene terephthalate) blends by addition of their transesterification product
In this study, poly carbonate (PC) and poly (ethylene terephthalate) (PET) were reactive melt-blended under two different conditions to produce PC/PET copolymers. For each condition, samples were taken at specified mixing times representative a specific structure of copolymers and each one employed to physically compatibilize a PC/PET blend with a fixed composition. Reactive blending and copoly...
متن کاملNovel blends of polylactide with ethylene glycol derivatives of POSS
Polylactide (PLA), a main biodegradable and biobased candidate for the replacement of petrochemical polymers, is stiff and brittle at room conditions. It is therefore of high interest to formulate new PLA-based materials suitable for applications demanding flexibility and toughness. In this work, novel blends of PLA with polyhedral oligomeric silsesquioxanes (POSS) grafted with longer (P1) and ...
متن کامل