A Mechanism of Motor Failure
نویسنده
چکیده
منابع مشابه
Failure mechanism and soil deformation pattern of soil beneath interfering square footings
In this research, the variation of ultimate bearing capacity, failure mechanism and deformation pattern of soil beneath two closely square footings have been studied using numerical methods. It is assumed that the adjacent footings are constructed on the surface of sand. The presented numerical analyses are based on explicit-finite-difference code, FLAC3D. The elasto-plastic behavior of soil is...
متن کاملA 3D Discrete Element Analysis of Failure Mechanism of Shallow Foundations in Rocks
In this research work, a 3D numerical modeling technique is proposed based on the 3D particle flow code in order to investigate the failure mechanism of rock foundations. Two series of footings with different geometries and areas are considered in this work. The failure mechanism obtained is similar to that of the Terzaghi’s but there is a negligible difference in between. Lastly, one equation ...
متن کاملSensorless Indirect Field Oriented Control of Single-sided Linear Induction Motor With a Novel Sliding Mode MRAS Speed Estimator
This paper proposes a new sliding mode control (SMC) based model reference adaptive system (MRAS) for sensorless indirect field oriented control (IFOC) of a single-sided linear induction motor (SLIM). The operation of MRAS speed estimators dramatically depends on adaptation mechanism. Fixed-gain PI controller is conventionally used for this purpose which may fail to estimate the speed correctl...
متن کاملمدلسازی و شبیه سازی خطاهای سیم بندی استاتور موتور القایی قفس سنجابی با استفاده از روش مدار معادل مغناطیسی
Induction Motor especially the squirrel cage type of this motor plays important role in industry. According to the application type, this motor place against various stresses that are caused failure in the motor. The most common failure is related to the Stator winding. Among these failures are turn-to-turn, coil-to-coil and phase to phase faults. Flow the high current do to the induction resul...
متن کاملInfluence of modeling material on undercut slope failure mechanism
A series of physical modeling tests were conducted by means of a beam type geotechnical centrifuge machine in order to investigate the drainage impact on the slope failure mechanism under centrifugal acceleration. Meanwhile, the phenomenon of stress redistribution in undercut slopes and the formation of arching effect were studied. For this purpose, a poorly graded sandy soil (Silica sand No. 6...
متن کاملOptimization of Ankle-Foot Prosthesis with Active Alignment by Passive Elements
Today, often ankle’s active prosthesis is used for transtibial amputated people’s walking, because these prostheses have some advantages such as increasing power and decreasing metabolism. In most of active prosthesis in order to create a movement or increase the force at the push-off, electrical actuators are used like a motor. In cases where a higher-power motor is necessary, the capacity, we...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2014