Retrieval of boundary layer height from lidar using extended Kalman filter approach, classic methods, and backtrajectory cluster analysis

نویسندگان

  • Robert F. Banks
  • Jordi Tiana-Alsina
  • José María Baldasano
  • Francesc Rocadenbosch
چکیده

This contribution evaluates an approach using an extended Kalman filter (EKF) to estimate the planetary boundary layer height (PBLH) from lidar measurements obtained in the framework of the European Aerosol Research LIdar NETwork (EARLINET) at 12 UTC ± 30-min for a 7-year period (2007-2013) under different synoptic flows over the complex geographical area of Barcelona, Spain. PBLH diagnosed with the EKF technique are compared with classic lidar methods and radiosounding estimates. Seven unique synoptic flows are identified using cluster analysis of 5756 HYSPLIT (HYbrid Single Particle Lagrangian Integrated Trajectory) three-day backtrajectories for a 16-year period (1998-2013) arriving at 0.5 km, 1.5 km, and 3 km, to represent the lower PBL, upper PBL, and low free troposphere, respectively. Regional recirculations are dominant with 54% of the annual total at 0.5 km and 57% of the total lidar days at 1.5 km, with a clear preference for summertime (0.5 km: 36% and 1.5 km: 29%). PBLH retrievals using the EKF method range from 0.79 1.6 km asl. The highest PBLHs are observed in southwest flows (15.2% of total) and regional recirculations from the east (34.8% of total), mainly caused by the stagnant synoptic pattern in summertime over the Iberian Peninsula. The lowest PBLHs are associated with north (19.6% of total) and northeast (4.3% of total) synoptic flows, when fresh air masses tend to lower PBLH. The adaptive nature of the EKF technique allows retrieval of reliable PBLH without the need for long time averaging or range smoothing, as typical with classic methods.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Performance Evaluation of the Boundary-Layer Height from Lidar and the Weather Research and Forecasting Model at an Urban Coastal Site in the North-East Iberian Peninsula

We evaluate planetary boundary-layer (PBL) parametrizations in the Weather Research and Forecasting (WRF) numerical model, with three connected objectives: first, for a 16-year period, we use a cluster analysis algorithm of three-day back-trajectories to determine general synoptic flow patterns over Barcelona, Spain arriving at heights of 0.5, 1.5, and 3 km; to represent the lower PBL, upper PB...

متن کامل

Atmospheric boundary-layer height estimation by adaptive Kalman filtering of lidar data [7827-5]

A solution based on a Kalman filter to trace the evolution of the atmospheric boundary layer (ABL) sensed by an elastic backscatter lidar is presented. An erf-like profile is used to model the mixing layer top and the entrainment zone thickness. The extended Kalman filter (EKF) enables to retrieve and track the ABL parameters based on simplified statistics of the ABL dynamics and of the observa...

متن کامل

IMPLEMENTATION OF EXTENDED KALMAN FILTER TO REDUCE NON CYCLO-STATIONARY NOISE IN AERIAL GAMMA RAY SURVEY

Gamma-ray detection has an important role in the enhancement the nuclear safety and provides a proper environment for applications of nuclear radiation. To reduce the risk of exposure, aerial gamma survey is commonly used as an advantage of the distance between the detection system and the radiation sources. One of the most important issues in aerial gamma survey is the detection noise. Various...

متن کامل

Rotated Unscented Kalman Filter for Two State Nonlinear Systems

In the several past years, Extended Kalman Filter (EKF) and Unscented Kalman Filter (UKF) havebecame basic algorithm for state-variables and parameters estimation of discrete nonlinear systems.The UKF has consistently outperformed for estimation. Sometimes least estimation error doesn't yieldwith UKF for the most nonlinear systems. In this paper, we use a new approach for a two variablestate no...

متن کامل

Design of Instrumentation Sensor Networks for Non-Linear Dynamic Processes Using Extended Kalman Filter

This paper presents a methodology for design of instrumentation sensor networks in non-linear chemical plants. The method utilizes a robust extended Kalman filter approach to provide an efficient dynamic data reconciliation. A weighted objective function has been introduced to enable the designer to incorporate each individual process variable with its own operational importance. To enhance...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2014