Experimental Study on the Fire Properties of Nitrocellulose with Different Structures
نویسندگان
چکیده
In order to ensure the safety of inflammable and explosive chemical substance such as nitrocellulose (NC) mixtures in the process of handing, storage, and usage, it is necessary to obtain the fire properties of NC with different exterior structures. In present study, fire properties of two commonly used nitrocelluloses with soft fiber structure and white chip structure were investigated by scanning electron microscope (SEM) and the ISO 5660 cone calorimeter. Experimental findings revealed that the most important fire properties such as ignition time, mass loss rate and ash content exhibited significant differences between the two structures of NC. Compared with the soft fiber NC, chip NC possesses a lower fire hazard, and its heat release rate intensity (HRRI) is mainly affected by the sample mass. In addition, oxygen consumption (OC) calorimetry method was compared with thermal chemistry (TC) method based on stoichiometry for HRRI calculation. HRRI results of NC with two structures obtained by these two methods showed a good consistency.
منابع مشابه
A novel method for manufacturing of wood flour/PP composites with better fire retardancy and mechanical properties
This study was conducted to investigate the effects of applying methods andamount of ammonium polyphosphate (0, 2 and 4 wt%) on fire retardancy andmechanical properties of wood flour/polypropylene composites. The resultsshowed that addition of fire retardant improved the mechanical properties such astensile and flexural strengths and fire retardancy of composites. But by increasingof fire retar...
متن کاملPrediction of Engineered Cementitious Composite Material Properties Using Artificial Neural Network
Cement-based composite materials like Engineered Cementitious Composites (ECCs) are applicable in the strengthening of structures because of the high tensile strength and strain. Proper mix proportion, which has the best mechanical properties, is so essential in ECC design material to use in structural components. In this paper, after finding the best mix proportion based on uniaxial tensile st...
متن کاملModelling of Conventional and Severe Shot Peening Influence on Properties of High Carbon Steel via Artificial Neural Network
Shot peening (SP), as one of the severe plastic deformation (SPD) methods is employed for surface modification of the engineering components by improving the metallurgical and mechanical properties. Furthermore artificial neural network (ANN) has been widely used in different science and engineering problems for predicting and optimizing in the last decade. In the present study, effects of conv...
متن کاملA New Investigation on Tunnel Pool Fire Phenomenon Using CFD Technique
In this study, the amount of generated pool fire, as a result of the release of chemicals in the case of an accident in tunnels, was simulated and the results were compared to the experimental data. At first, various amounts of spatial resolution (R*) were considered to compare the existing experimental data at different heights at the upstream, downstream and above the pool fire...
متن کاملExperimental Study on Amine-Functionalized Carbon Nanotubes’ Effect on the Thermomechanical Properties of CNT/Epoxy Nano-composites
This paper investigated the effect of the amine-functionalized carbon nanotubes (CNTs) on the thermomechanical properties of CNT/epoxy nanocomposites. Mechanical stirring and ultra-sonication were utilized to uniformly disperse CNTs into the epoxy matrix. Non-functionalized and amine-functionalized CNTs with different weight percentages (wt. %) were mixed into the epoxy resin. Using standard te...
متن کامل