Worker Behavior and Intension Modeling in Production Process
نویسندگان
چکیده
This paper proposes a vision-based human modeling by using both analytical property of human body performance and the concurrent gaze pattern for production process. Authors developed two systems required for 3D motion analysis: Firefly Capturing Camera (FCC) and gaze analysis: Passive Eye Camera (PEC). Moreover, FCC, PEC and other capture systems measured veteran and beginner worker's motion and gaze pattern for analyze worker's skill especially vision-based. Authors demonstrated these systems are effective to construct the vision-based model of human behavior in production process.
منابع مشابه
An integrated production-marketing planning model With Cubic production cost function and imperfect production process
The basic assumption in the traditional inventory model is that all outputs are perfect items. However, this assumption is too simplistic in the most real-life situations due to a natural phenomenon in a production process. From this it is deduced that the system produces non-perfects items which can be classified into four groups of perfect, imperfect, reworkable defective and non-reworkable d...
متن کاملAlkaline Earth Metal Oxide Catalysts for Biodiesel Production from Palm Oil: Elucidation of Process Behaviors and Modeling Using Response Surface Methodology
Four different alkaline earth metal oxides i.e. MgO, CaO, SrO and BaO were used as heterogeneous catalysts for biodiesel production from palm oil. Effects of critical process variables i.e. reaction time, methanol to oil ratio and temperature were investigated. The results were then fitted to a historical design to study the Analysis of Variance (ANOVA), to characterize interactions between...
متن کاملModeling and Simulation of Polyhydroxybutyrate Production by Protomonas extorquens in Fed-batch Culture
Modeling and simulation of Polyhydroxybutyrate (PHB) production by Protomonas extorquens in fed-batch culture were conducted in this research. The fed-batch model, developed for this process, employed a kinetic model proposed by other researchers. Several kinetic models were investigated to choose the best model. The criterion for this selection was goodness of fit (δ2). Haldane kinetic model w...
متن کاملA new investigation on modeling of permeability reduction during CO2 flooding processes in sandstone oil reservoirs
Permeability reduction in oil reservoirs during primary oil recovery and using the enhanced oil recovery methods are complicated problem which most of the oil field in worlds has encountered. In this work, a modified model based on four phase black oil model (oil, water, gas, and asphaltene) was developed to account permeability reduction during CO2 flooding in cylindrical coordinates around a ...
متن کاملDevelopment of a New Dynamic Friction Model for Analytical Modeling of Elliptical Vibration Assisted Turning Process
A new dynamic friction model for modeling of elliptical vibration assisted turning (EVAT) was developed in this research. The periodic change of the friction force direction is known to be one of the most important causes of this phenomenon. In modeling of machining processes (including the EVAT process), static Coulomb friction model was employed by most of the researchers. Because of the peri...
متن کامل