On a three-dimensional volume tracking model of droplet impact

A three-dimensional model has been developed, of droplet impact onto asymmetric surface geometries. The model is based on RIPPLE, and combines a xed-grid control volume discretization of the ow equations with a volume tracking algorithm to track the droplet free surface. Surface tension is modelled as a volume force acting on uid near the free surface. Contact angles are applied as a boundary condition at the contact line. The results of two scenarios are presented, of the oblique impact of a 2 mm water droplet at 1 m/s onto a 45 incline, and of a similar impact of a droplet onto a sharp edge. Photographs are presented of such impacts, against which the numerical results are compared. The contact angle boundary condition is applied in one of two ways. For the impact onto an incline, the temporal variation of contact angles at the leading and trailing edges of the droplet was measured from photographs. This data is applied as a boundary condition to the simulation, and an interpolation scheme proposed to evaluate contact angles between the leading and trailing edges. A simpler model is then proposed, for contact angle as a function of contact line velocity, and applied to both geometries. The model requires values of only two contact angles, at a rapidly advancing and a rapidly receding contact line. Simulation results compare well with photographic data.