3d Steady State Riser Simulations Using Filtered Gas-solid Momentum Transfer Models
نویسندگان
چکیده
INTRODUCTION To account for meso-scale phenomena in coarse grid simulations, Reynolds stress terms appearing in the filtered gas-solid flow equations have to be modeled. Filtered models for the gas-solid momentum transfer are focused on and possible approaches are discussed. Three-dimensional steady-state simulations of developing flow in the bottom section of a riser in which the solid phase is accelerated by the gas phase are carried out to investigate the impact of using filtered gas-solid momentum transfer models.
منابع مشابه
Computational Fluid Dynamic- Two Fluid Model Study of Gas-Solid Heat Transfer in a Riser with Various Inclination Angles
A two fluid model (TFM) was used to study gas-solid heat transfer in a riser with different inclination angles. A two dimensional pipe with 5.8 cm internal diameter and 5 meter length was chosen. Effect of bed angle and solid particles feed rate were studied on the heat transfer behavior of gas and solid particles. Obtained results from simulation are compared with the experimental data in the...
متن کاملCfd Analysis of Gas - Particle Interaction in a Circulating Fluidized Bed Riser
P.Ragothaman,[email protected] Dr.N.V.Mahalakshmi,[email protected] Institute for Energy Studies, Anna University, Chennai-25,Tamilnadu, India. P.sudhakar,[email protected] Abstract Circulating fluidized bed reactors are widely applied in industry for power generation in boilers and gasifier. Computational Fluid dynamics modeling of hydrodynamics and heat transfer can be an effe...
متن کاملHeterogeneous Flow Structure in Gas-solid Risers: Continuous Modeling
Abstract Gas-solid riser flow exhibits strong heterogeneous structure in both axial direction and radial directions. Recent experimental studies reveal that the general radial solids concentration profiles present a double ring structure and the formation of a solid core region which have a relative higher concentration than the annulus region. This paper is focused on a comprehensive modeling ...
متن کاملHybrid Two-Fluid DEM Simulation of Gas-Solid Fluidized Beds
Simulations of gas-solid fluidized beds have been performed using a hybrid simulation method, which couples the discrete element method (DEM) for particle dynamics with the averaged two-fluid (TF) continuum equations for the gas phase. The coupling between the two phases is modeled using an interphase momentum transfer term. The results of the hybrid TF-DEM simulations are compared to experimen...
متن کاملSteady-State and Dynamic Simulations of Gas Absorption Column Using MATLAB and SIMULINK
Separation is one of the most important process in all the chemical industries and the gas absorption is the simplest example of separation process which is generally used for the absorption of dilute components from a gaseous mixture. In the present work, a dynamic system of mathematical equation (algebraic and differential) is modeled to predict the behavior of the absorption column using mat...
متن کامل