Cryogenic design of the new high field magnet test facility at CERN
نویسندگان
چکیده
In the framework of the R&D program related to the Large Hadron Collider (LHC) upgrades, a new High Field Magnet (HFM) vertical test bench is required. This facility located in the SM18 cryogenic test hall shall allow testing of up to 15 tons superconducting magnets with energy up to 10 MJ in a temperature range between 1.9 K and 4.5 K. The article describes the cryogenic architecture to be inserted in the general infrastructure of SM18 including the process and instrumentation diagram, the different operating phases including strategy for magnet cool down and warm up at controlled speed and quench management as well as the design of the main components. © 2014 The Authors. Published by Elsevier B.V. Peer-review under responsibility of the organizing committee of ICEC 25-ICMC 2014.
منابع مشابه
A new cryogenic test facility for large superconducting devices at CERN
To expand CERN testing capability to superconducting devices that cannot be installed in existing test facilities because of their size and/or mass, CERN is building a new cryogenic test facility for large and heavy devices. The first devices to be tested in the facility will be the S-FRS superconducting magnets for the FAIR project that is currently under construction at the GSI Research Cente...
متن کاملFirst Cryogenic Testing of the ATLAS Superconducting Prototype Magnets
The superconducting magnet system of the ATLAS detector will consist of a central solenoid, two end-cap toroids and the barrel toroid made of eight coils (BT) symmetrically placed around the central axis of the detector. All these magnets will be individually tested in an experimental area prior to their final installation in the underground cavern of the LHC collider. A dedicated cryogenic tes...
متن کاملEUROPEAN ORGANIZATION FOR NUCLEAR RESEARCH European Laboratory for Particle Physics THE PROXIMITY CRYOGENIC SYSTEM FOR THE ATLAS TOROIDAL MAGNETS
ATLAS is a very high-energy detector for the Large Hadron Collider (LHC) at CERN. The superconducting magnet used to provide the required magnetic field consists of four sub-systems: a central solenoid and a very large toroidal magnet comprising two end-cap magnets and the barrel toroid magnet. The associated cryogenic system, currently in the final specification and procurement phase has been ...
متن کاملHall Element Relative Position and Angle Calibrations for the Cryogenic Permanent Magnet Undulator
A three dimensions Hall probe has be manufactured for characterizing the magnetic performance of Cryogenic Permanent Magnet Undulator (CPMU) of Chinese High Energy Photon Source (HEPS) at Institute of High Energy Physics (IHEP). The positional and angular misalignment errors of the Hall sensors play an important role in the measurement accuracy of CPMU. In order to minimize the misalignment err...
متن کاملThe BOO model coil in the ATLAS magnet test facility - Applied Superconductivity, IEEE Transactions on
A 1-m sim model coil has been developed to investigate the transport properties of the three aluminumstabilized superconductors used in the ATLAS magnets. The coil, named BOO, is also used for debugging the cryogenic, power and control systems of the ATLAS Magnet Test Facility. The coil comprises two double pancakes made of the Barrel Toroid and End-Cap Toroid conductors and a single pancake ma...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2015