Xflab: an On-line Verification Tool for Fuzzy Controllers
نویسندگان
چکیده
This paper shows an on-line verification tool for fuzzy controllers. On-line verification means the simulation of the software model of the controller using the real plant in a closed loop system. The tool is part of a fuzzy logic system development environment that permits the inclusion of the tool into a design flow methodology for fuzzy systems.
منابع مشابه
Fuzzy Logic Controller Stability Analysis Using a Satisfiability Modulo Theories Approach
While many widely accepted methods and techniques exist for validation and verification of traditional controllers, at this time no solutions have been accepted for Fuzzy Logic Controllers (FLCs). Due to the highly nonlinear nature of such systems, and the fact that developing a valid FLC does not require a mathematical model of the system, it is quite difficult to use conventional techniques t...
متن کاملFrequency Control of an Islanded Microgrid based on Intelligent Control of Demand Response using Fuzzy Logic and Particle Swarm Optimization (PSO) Algorithm
Due to the increasing penetration of renewable energies in the power system, the frequency control problem has attracted more attention, while the traditional control methods are not capable of regulating the frequency and securing the stability of the system. In smart grids, demand response as the frequency control tool reduces the dependence on spinning reserve and high cost controllers. In a...
متن کاملWuzzy: a Real-time Fuzzy Control Tool and Its Application
Wuzzy, presented in this paper, is a software tool for real-time control in Windows 95 environment. It is suited to assist in the project, development and tuning of controllers, particularly fuzzy ones. It allows simulations and on-line changes of several choices inherent to fuzzy modelling and control systems. Wuzzy includes a parameter controller editor, a membership function editor, a rule ...
متن کاملSIMULATION AND MONITORING OF THE MACHINING PROCESS VIA FUZZY LOGIC AND CUTTING FORCES
On time replacement of a cutting tool with a new one is an important task in Flexible Manufacturing Systems (FMS). A fuzzy logic-based approach was used in the present study to predict and simulate the tool wear progress in turning operation. Cutting parameters and cutting forces were considered as the input and the wear rate was regarded as the output data in the fuzzy logic for construct...
متن کاملControlling Electrochemical Machining By Using a Fuzzy Logic Approach
New trends and the effect of key factors influence the quality of the holes produced by ECM processes. Researchers developed a fuzzy logic controller by adding intelligence to the ECM process. Maintaining optimum ECM process conditions ensures higher machining efficiency and performance. This paper presents the development of a fuzzy logic controller to add intelligence to the ECM process. An e...
متن کامل