Breaks in Thermal Spraying Processes
نویسندگان
چکیده
The detection of structural changes in time series from industrial processes monitoring is of great interest. We investigate the limits and possibilities of two recently developed methods, one for the off-line detection of changed volatilities [Wied et al., 2011] and one for the on-line detection of changes in the course of the time series [Borowski and Fried, 2011]. The investigation is carried out on several time series from thermal spraying processes. The processes are deliberately manipulated to produce structural changes at known time points.
منابع مشابه
Modeling of splat particle splashing data during thermal spraying with the Burr distribution
Splashing of splat particles is one of the most important phenomena in industrial processes such as thermal spray coating. The data relative to the degree of splashing of splats sprayed with a normal angle are commonly characterized by the Weibull distribution function. In this present study, an effort has been made to show that the Burr distribution is better than the Weibull distribution for ...
متن کامل1 Arc Plasma Torch Modeling
Arc plasma torches are the primary components of various industrial thermal plasma processes involving plasma spraying, metal cutting and welding, thermal plasma CVD, metal melting and remelting, waste treatment and gas production. They are relatively simple devices whose operation implies intricate thermal, chemical, electrical, and fluid dynamics phenomena. Modeling may be used as a means to ...
متن کاملModelling for Thermal Control of Vacuum Plasma Spraying
Vacuum plasma spraying (VPS) is an industrial technique used to coat substrates with a wide range of materials for numerous applications. Historically, vacuum plasma spraying processes have been open-loop processes with, at most, closed-loop control of the spray parameters. Such processes would benefit from closed-loop control as the issues of process repeatability and coating quality could be ...
متن کاملHigh Energy Ball Milling - a Promising Route for Production of Tailored Thermal Spray Consumables
The high energy ball milling technique permits production of composite powders suitable for application in thermal spray processes. Different milling systems are compared concerning their potential for production of composite powder feedstock for spraying processes. Hard phase materials like carbides or oxides are incorporated into various metallic matrices including light weight alloys based o...
متن کاملVision-aided Monitoring & Control of Thermal Spray, Spray
Vision is one of the most powerful forms of non-contact sensing for monitoring and control of manufactusang processes. However, processes involving an arc plasma or flame such as welding or thermal spraying pose particularly challenging problems to conventional vision sensing and processing techniques. The arc or plasma is not typically limited to a single spectral region and thus cannot be eas...
متن کامل