Equivalent Circuit and Calculation of Its Parameters of Magnetic-Coupled-Resonant Wireless Power Transfer

Because of an improvement of wireless communication technologies, cables are taken away step by step from an electrical equipment. Now, a power cable is the last wire connected to the equipment. Therefore, wireless power transfer (WPT) technology is desired. Conventionally, microwave power transfer and magnetic induction have been used for this purpose. Microwave power transfer technology utilizes a directivity antenna with high-power microwave generator. This technology is applicable for very long range power transfer, such as space solar power system(SPS). However, this technology requires precise directivity control. Thus it is difficult to use in consumer electrical appliances. Magnetic induction technology is already used for power supply for a cordless phone, electric tooth blush, or electric shaver. RFID tag also utilizes magnetic induction technology for power supply. However, demerit of this technology is very short distance for power transmission. Although transmitter and receiver is electrically isolated, they should be physically touched. Wireless power transfer using magnetic-coupled resonance is proposed by MIT in 2007 (1). 60W power transmission experiment for 2m distance was demonstrated (2). It is amazing that this technology is applicable although human body is located just between a transmitter and receiver. Thus, it is expected that this technology is used in home electrical appliances or electric vehicles. On the other hands, for practical implementation, design criteria of this system should be established. Although the magnetic-coupled resonant WPT technology is the epoch-making technology, this technology seems similar technology to magnetic induction. Both of them use magnetic field to transfer power and magnetic coil to feed/pickup power. The key point of the magnetic-coupled resonant WPT is using capacitance to occur resonance. However, even in conventional magnetic induction technology, capacitor is also used. The feature of the magnetic-coupled resonant WPT is to utilize odd-mode and even-mode resonance. In the magnetic induction technology, frequency is fixed according to the transfer distance. However in the magnetic-coupled WPT technology, frequency should be varied according to the transfer distance. In the section 2, we explain basic theory of magnetic-coupledWPT system through equivalent circuit expression. Method of moment (MoM) simulations will be demonstrated for validation. In the section 3, a procedure to calculate parameters of the equivalent circuit of Equivalent Circuit and Calculation of Its Parameters of Magnetic-Coupled-Resonant Wireless Power Transfer 6