Real-time Modelling and Simulation Applied to the Treatment of Electroplating Wastewater
نویسندگان
چکیده
Eco-industrial processes require high reliability control and supervision methodologies, so as to achieve the best compromise possible between the process’ efficiency, safety and economy. Industries often focus on the two first objectives mainly, since they are unwilling to “experiment” not yet validated and/or complex control methodologies if safety and/or efficiency of the process may be jeopardized. This work focuses on an industrial wastewater treatment process, including a cyanides oxidation stage and a neutralization stage, applied to the surface treatment effluents. The project involved the development and validation of a model which enables to simulate various pH-control strategies as well as faults in the CSTRs. Copyright 2002 IFAC
منابع مشابه
Adsorption of Copper(II) from an Wastewater Effluent of Electroplating Industry by Poly(ethyleneimine)-Functionalized Silica
The poly(ethyleneimine)-functionalized silica has been developed successfully as an effective adsorbent for the adsorption removal of Cu(II) ions from electroplating wastewater. The influences of pH, contact time and initial concentration of Cu(II) ions on the adsorption capacity and the effect of adsorbent dosage on the removal efficiency of Cu(II) ions from electroplatin...
متن کاملNickel removal from electroplating industry wastewater: A bamboo activated carbon
Water is prime requirement for surviving of any living beings. The existence of surface water and groundwater sources are used for domestic, agriculture and industrial purposes in all over the world. Fresh water from both the water sources is highly contaminated in recent years because of rapid population growth, modern agriculture and industrial growth. Among them, contamination of water sour...
متن کاملChromium removal and water recycling from electroplating wastewater through direct osmosis: Modeling and optimization by response surface methodology
Background: Considering the carcinogenic effects of heavy metals, such as chromium, it is essential to remove these elements from water and wastewater. Direct osmosis is a new membrane technology, which can be a proper alternative to conventional chromium removal processes. Methods: The wastewater samples were collected from an electroplating unit, located in Alborz industrial city, Qazvin, Ir...
متن کاملبررسی کارایی فرایند‌های فتوکاتالیستی با و بدون حضور آب اکسیژنه در حذف سیانید از محلول‌های آبی
Background and purpose: Cyanide (CN-) is of dangerous pollutants in the environment from industries such as electroplating, mining and paint entering into environment. The present study aimed to review the efficiency of cyanide removal by zirconia photocatalytic process with and without hydrogen peroxide (H2O2). Materials and methods: This was an applied-fundamental study and was conducted in ...
متن کاملDynamic Performance Analysis and Simulation of a Full Scale Activated Sludge System Treating an Industrial Wastewater Using Artificial Neural Network
Due to changeable nature of the industrial wastewaters, proper operation of an industrial wastewater treatment plant is of prior importance in order to keep the process stability at the desired conditions. In this mean, simulation of the treatment system behavior using artificial neural network (ANN) can be an effective tool. This paper evaluates long term performance and process stability of ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2002