Mine-to-mill optimisation: effect of feed size on mill throughput
نویسنده
چکیده
Modifying blasting practices to achieve a more suitable mill feed size – which varies according to the crushing/grinding circuit – can achieve up to a 30% increase in throughput. Following an initial benchmarking of an operation’s practices, SRK can advise on how value-added blasting will deliver improvements in both mill capacity and overall consistency of performance. SRK employs modelling tools to simulate the effect of upstream changes in blasting and crushing on grinding circuit tonnage.
منابع مشابه
Optimisation of Fragmentation and Comminution at Boliden Mineral, Aitik Operation
The objective of this thesis is to optimise the fragmentation at Boliden Minerals open pit mine Aitik. Blasting is one of the main operations in mining, and its performance has a major impact on the overall economy of the mine. The fragmentation process affects not only the local productivity and unit costs of the mining department. It also affects the performance of the subsequent comminution ...
متن کاملA STUDY ON THE SPECIFIC RATE OF BREAKAGE OF IRON ORE OF SANGAN MINE IN A LABORATORY BALL MILL
Abstract: The specific rate of breakage is one of the most important factors in evaluation of grinding process especially in ball mill. In this article the effect of ball size and feed size on selection function were investigated using batch grinding circuit on two-iron ore anomaly (B, C) from sangan mine in north of Iran. Eight different monosize fractions were prepared between 2000 and 50...
متن کاملNew laboratory scale Grinding method to predict energy and the feed grindability of mill of Sarcheshmeh Copper Complex
One of the factors which are usually difficult to be measured in mills is the grindability and distribution of feed under real situation and in a short time. In the condition of achieving a fast and convenient way to determine these parameters, the proper relationship between energy, hardness and particle size distribution can be obtained. Feed hardness is one of the most important factors in g...
متن کاملIncreasing drying efficiency by modifying the design of feed chute of the Gol-e-Gohar pelletizing plant ball mill
Pelletizing plant of the Gol-E-Gohar mining and industrial company consists of a burner, a dry ball mill (6.2 m × 13 m), and an air separator. The ball mill consists of a 2 m-long drying and an 11 m-long grinding chambers. The iron ore concentrate is fed to the drying chamber by a feed chute. It was found that when the feed moisture content increased from 1.3% to 3.5%, the throughput decreased ...
متن کاملEvolution of AG mill shell liner design at Gol-E-Gohar concentration plant
Liner design is becoming an increasingly more important tool for the AG/SAG mill performance optimization. The Gol-E-Gohar iron ore concentration plant uses three 9 m × 2.05 m autogenous mills (AG) in parallel in a dry operation. Due to large variations in feed characteristics and inadequate blending, the performance of AG mills has been lower than the target value. In order to increase the cir...
متن کامل