Pitting Corrosion of Heat-treatable Aluminium Alloys and Welds: a Reveiw
نویسندگان
چکیده
This review attempts to present the current understanding of the mechanism of pitting corrosion of heat treatable aluminium alloys and their welds. The role of alloying elements and intermetallic phases on the corrosion behavior of these alloys has been discussed. Pitting mechanism of aluminiumcopper alloys is specifically discussed. Finally effect of welding on the pitting corrosion of these alloys is also presented.
منابع مشابه
Microstructure and mechanical characteristics of dissimilar aluminium alloy joining employing gas tungsten arc welding
Despite the increased use of aluminium alloys in several industries, their common concern is the difficulty of joining dissimilar alloys using welding techniques. Based on this, the primary purpose of this research is to assess the mechanical characteristics of dissimilar joining of heat-treatable 6061 and non-heat-treatable 5083 aluminium alloys by gas tungsten arc welding and to discover the ...
متن کاملMicrostructure and mechanical characteristics of dissimilar aluminium alloy joining employing gas tungsten arc welding
Despite the increased use of aluminium alloys in several industries, their common concern is the difficulty of joining dissimilar alloys using welding techniques. Based on this, the primary purpose of this research is to assess the mechanical characteristics of dissimilar joining of heat-treatable 6061 and non-heat-treatable 5083 aluminium alloys by gas tungsten arc welding and to discover the ...
متن کاملThe Strength of Friction Stir Welded and Friction Stir Processed Aluminium Alloys
Local strength of friction stir (FS) welds and FS processed aluminium alloys in heat treatable aluminium alloys is dominated by precipitation hardening. Strengthening due to stored dislocations is generally limited to 40MPa, and grain size strengthening is generally less than 10MPa. Local crystallographic texture can cause yield strength variation on the order of 5%. Published models for streng...
متن کاملRoughness, Residual Stresses and Pitting Corrosion Effect on Shot
Original scientific paper The paper deals with the effect of roughness, residual stresses and pitting corrosion on different shot peened (SP) ENAW 7075 aluminium alloy in different states. Suitable residual stress profile increases the applicability and life cycle of mechanical parts, treated by shot peening. Pitting corrosion has a major influence on aging of structural elements made of high s...
متن کاملEffect of Modified AA 5356 Filler on Corrosion Behavior of AA 6061 Alloy GTA Welds
The corrosion behavior of the fusion zone of gas tungsten arc (GTA) welds of AA6061 alloy was studied. Role of gas tungsten arc welding techniques such as continuous current (CC) and pulsed current (PC) and reference filler (AA5356) were studied. Role of different grain refiners such as scandium, zirconium and Tibor in the reference filler was studied. Dynamic polarization testing was used to d...
متن کامل