Backplane Considerations for an RGB 3D Display Device
نویسنده
چکیده
The design decision has been made to allow the transparent cube to be removed from its cradle, and thus to be completely independent. This gives the cube a beautiful aesthetic quality, as well as an interesting tactile one, but this design also makes things technically complex. The second part of the paper will look at light enhancement of the LEDs, and waveguide coupling from the backplane into the cube.
منابع مشابه
Discussing Pixel Circuits for Hybrid Sensor and Display Pixel Arrays
A hybrid sensor and display pixel and its operating scheme are proposed. The circuit consists of two main parts: 1) the light sensor and 2) the integrated display onto the backplane. Hybrid a-Si:H/Nanocrystalline silicon (nc-Si) TFTs were used as a hybrid phototransistor incorporating both sensing and switching on the same device. The display backplane design was implemented using a driving TFT...
متن کاملAN 596: Modeling and Design Considerations for 10 Gbps Connectors
This application note discusses the impact of backplane connectors on a 10 Gbps serial channel performance. It demonstrates how toproject the connector’s impact at the system level with the help of an industrial simulation software. Design considerations of the backplane connector and pin field are discussed to minimize the connector’s impact and to meet the channel’s signal integrity requireme...
متن کاملFlexible display enabling technology
In a collaboration between Pennsylvania State University and Princeton University, we have been laying the foundations for flexible display technology. Flexible substrates including plastic or steel foil, backplanes of organic or silicon transistors, and directly printed RGB organic light emitting diodes are issues central to this collaboration. We present an overview of key recent results. Sil...
متن کاملActive Matrix OLED Using 150C a-Si TFT Backplane Built on Flexible Plastic Substrate
Flexible displays fabricated using plastic substrates have a potential for being very thin, light weight, highly rugged with greatly minimized propensity for breakage, roll-to-roll manufacturing and lower cost. The emerging OLED display media offers the advantage of being a solid state and rugged structure for flexible displays in addition to the many potential advantages of an AM OLED over the...
متن کاملEffective Channel-Independent Inverse Characterization Method for Display Device
This paper proposes a channel-independent inverse characterization process based on the GOG model for a display device. The CIEXYZ values for each of RGB channel can estimated from nine channel-independent interpolation TRCs (Tone Response Curves), and the result of this characterization method is better than that from conventional three channel-independent interpolation TRCs. However inverse c...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2014