Study of Automatic Test System of Surface Flatness in No-Till Field Based on the PLC Technology
نویسندگان
چکیده
In this paper, automatic test system of surface flatness was designed according to the characteristics of the no-till field by combining the PLC (Programmable Logic Controller), laser sensor and stepping motor automatic control technologies. Monitor and Control Generated System (MCGS) configuration software was used to form the interaction interface. Real-time data report and the trend line could be created by accessing PC machine to this system, and then the surface roughness detection was realized automatically. Compared with the traditional test methods, results of the automatic test system showed that the measured value is accordance with the artificial measured value, and the correlation coefficient between them was above 0.95; and the detection efficiency had been improved by 2.3 times. These results proved the effectiveness of the automatic test system in detecting the surface flatness of the no-till field.
منابع مشابه
Differential Flatness Method Based on Pre-set Guidance and Control Subsystem Design for a Surface to Surface Flying Vehicle (TECHNICAL NOTE)
The purpose of this paper is to design a guidance and control system and evaluate the performance of a sample surface‑to‑surface flying object based on preset guidance with a new prospective. In this study, the main presented idea is usage of unique property of governor differential equations in order to design and develop a controlled system. Thereupon a set of system output variables have bee...
متن کاملAutomatic Interpretation of UltraCam Imagery by Combination of Support Vector Machine and Knowledge-based Systems
With the development of digital sensors, an increasing number of high-resolution images are available. Interpretation of these images is not possible manually, which necessitates seeking for practical, fast and automatic solutions to solve the environmental and location-based management problems. The land cover classification using high-resolution imagery is a difficult process because of the c...
متن کامل· Technical note Design of a PLC system for automatic I-123 production
ABSTRACTBackground: Design of the production system for Iodine-123 has begun recently in nuclear research centre of agricultural and medicine (NRCAM). The production system consists of pipes for xenon gas transfer, equipped with 10 valves, 3 heaters, fluid nitrogen and 2 vacuum pumps. In the first prototype the function of elements was being done manually by an operator. Because dispensing rad...
متن کاملAnalysis of motor fan radiated sound and vibration waveform by automatic pattern recognition technique using “Mahalanobis distance”
In recent years, as the weight of IT equipment has been reduced, the demand for motor fans for cooling the interior of electronic equipment is on the rise. Sensory test technique by inspectors is the mainstream for quality inspection of motor fans in the field. This sensory test requires a lot of experience to accurately diagnose differences in subtle sounds (sound pressures) of the fans, and t...
متن کاملPic Microcontroller-Based Automatic Meter Reading (AMR) System Using the Low Voltage (LV) Power Line Network (TECHNICAL NOTE)
Automatic Meter Reading (AMR) is the remote collection of consumption data from customer’s utility meters over telecommunications, radio, power line and other links. AMR provides water, electric and gas utility service companies the opportunity to streamline metering, billing and collection activities, increase operational efficiency and improve customer service. The AMR system consists of thre...
متن کامل