H∞ Control Design of PWM Voltage-Controlled DC-DC Ćuk Converter
نویسندگان
چکیده
In the present paper an H∞ control design is presented for DC-DC Ćuk converter using its average model. Lyapunov equation is used to derivate the controller and to estimate the L2 gain too. Theoretical result is supported by numerical simulations. Key-Words: H∞ control, PWM, Lyapunov equation, Ćuk converter.
منابع مشابه
Development of Average Model for Control of a Full Bridge PWM DC-DC Converter
This paper presents a detailed small-signal and transient analysis of a full bridge PWM DC-DC converter designed for high voltage, high power applications using an average model. The derived model is implemented in a typical system and used to produce the small-signal and transient characteristics of the converter. Results obtained in the analysis of the high voltage and high power design examp...
متن کاملA High Efficiency Low-Voltage Soft Switching DC–DC Converter for Portable Applications
This paper presents a novel control method to improve the efficiency of low-voltage DC-DC converters at light loads. Pulse Width Modulation (PWM) converters have poor efficiencies at light loads, while pulse frequency modulation (PFM) control is more efficient for the same cases. Switching losses constitute a major portion of the total power loss at light loads. To decrease the switching losses...
متن کاملA Survey On Boost Derived Hybrid Converter For Simultaneous DC And AC Applications
This Paper introduces new hybrid converter topologies which can supply simultaneously AC as well as DC from a single DC source. The new Hybrid Converter is derived from the single switch controlled Boost converter by replacing the controlled switch with voltage source inverter (VSI). This new hybrid converter has the advantages like reduced number of switches as compared with conventional desig...
متن کاملHow to Design an Efficient DC-DC Converter Using the DS1875 PWM Controller - Application Note - Maxim
The DS1875 features a pulse-width modulation (PWM) controller that can be used to control a DC-DC converter. The DC-DC converter can then be used to generate the high bias voltages necessary for avalanche photodiodes (APDs). This application note describes the operation of a boost converter that uses the DS1875. Discussion covers the selection of the inductor and switching frequency, and the se...
متن کاملIncreasing Voltage Gain by New Structure of Inductive Switching DC-DC Converter
In a photovoltaic system, sun light energy is converted to electricity. The generatedelectricity has a low DC voltage. In order to increase voltage generated by photovoltaic cells (PV),an additive DC-DC converter is required to raise the low voltage to a good level which provides theconditions for connection to DC-DC converters. Low wastes, low costs, and high efficiency are someother specifica...
متن کامل